Power consumption of Stick Up Cam Elite

Products Security Cams
#1

Does anyone know the exact power consumption of the Stick Up Cam Elite?

This is in order to run a 100’ ethernet cable from the POE unit to the actual cam.
I would like to use an elegant flat cat7 cable which uses 30AWG thickness wire which is limited to 12W. The POE is rated to provide up to 15.4W, but I doubt the cam actually uses that. But if more than 12W then I’ll have to go to at 26AWG thicker ethernet cable.

#2

Hey @tom_aht. After checking with the appropriate teams, it looks like the Stick Up Cam Elite’s POE typically use 4-5 watts of power. This can vary depending on usage, but shouldn’t vary all too much for you. :slight_smile:

1 Like