Responses (4)

• C

  Caitlyn_Ring

  Hi @Sprockle. You can find an installation guide for the Doorbell Wired in our Help Center Article [here](https://support.ring.com/hc/en-us/articles/360054984332-Video-Doorbell-Wired-Installation-Guide). For any advanced wiring outside of that, it may be best to contact a licensed electrician or consult with our support team for further guidance. You can give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please see [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support

  0

  •

  16-03-2021 09:28:36

  •

  Reply
• M

  M151Mutt

  Same question. Tried the support team call number as suggested but all they would say was follow the instructions. Right off the bat that doesn't work cause my priorty was installing a rear doorbell/camera first. I installed the first one at backdoor and used rear and trans terminals for it to work correctly and it works with the new ring chime as well. Works great. Old doorbell still mounted out front and works the old mech chime. Would like to install second wired ring doorbell out front now but not sure on second jumper being safe to jump front-trans-rear all together.

  0

  •

  15-04-2021 02:52:48

  •

  Reply

  T

  Tom_Ring

  Hi @M151Mutt. If you are installing a Doorbell Wired for both the Front and Back, you will need to install the jumper on the Front-Trans and Rear-Trans. This essentially is 2 separate circuits and they each need their own jumper. I hope this information is helpful.

  1

  •

  16-04-2021 10:54:31

• L

  lockdown1101

  Hey all, just wanted to confirm; I've just finished installing my second Ring Doorbell Wired to the same chime with a single 16v transformer. Having a jumper between BackTrans and FrontTrans seems to work fine. I can access both cameras in live view from the app, so they're both online. No idea if my voltage is ideal for 2 or anything, just confirming that it is working.

  2

  •

  30-04-2021 02:23:14

  •

  Reply

  B

  blcox

  Thanks for the confirmation! I had purchased one Ring to test and now purchased another one for my other door and was wondering about the wiring.

  1

  •

  30-09-2022 03:01:58

• P

  PKing4206

  @Tom_Ring @Sprockle Thanks for this answer! I posted this same question and then found this thread. Exactly what I needed to know. Basically wanted to confirm you could use a second jumper on Trans/Rear in addition to the existing jumper on trans/Front in the same mechanical chime box. Tx again!

  2

  •

  09-06-2021 11:28:46

  •

  Reply