Responses (3)

M

MikeC1

Hi, thought I'd give you all an update. I called Ring support and they confirmed that the doorbell does recognise that it is hardwired, but the central application wasn't recording that status. That's not my phone application, but the 'cloud' application. After a few days, this was resolved an my doorbell now shows 'Hardwired' status on the phone app.Sadly however, I'm still only getting about 4 days use out of the unit before the battery dies, even though it's hardwired 24x7. I have about 10-14 activations a day, and take a snapshot every 15 mins which I don't think is excessive (is it?). That's just the family coming and going, a couple of deliveries etc. It only triggers if someone comes onto our driveway, not when people walk past the house. Have spoken to some work colleagues who confirm that they regularly get about 3 weeks use. The only real difference seemed to be they have stronger WiFi (RSSI -40, vs mine which is -60).I'm now faced with a problem:-a) Is my doorbell defective ?b) Is my battery defective ?c) Is this just the way it is for my use case ?I'm reluctant to buy a new unit on the gamble that my one is defective but at the same time I can't have a system which won't even last a week without having the battery removed and recharged. I'm quite happy with the concept that this is a trickle charge and I do need to charge the battery periodically, but not every few days. Will let you know what I do. Mike

0

•

04-08-2021 08:51:44

•

Reply

M

MikeC1

Hi, Probably my last update on this. A couple of relevant things have happened since my last update, a) I put a wifi repeater close to the doorbell - I now have a RSSI of -52. However this didn't seem to change the battery drain. It still only lasted a couple of days. b) I re-made all my wiring

1

•

14-08-2021 11:53:55

T

Tom_Ring

Hi @MikeC1. Thank you for the update and I'm glad that this is now working for you!

0

•

16-08-2021 19:39:10

M

MikeC1

Hi everyone,I thought I'd not need to put another update on here. However, my doorbell has again started to discharge over a period of about 4 days. It still says hardwired, it still has the continuous white ring on, and there is still measurable current flowing to it. This time nothing has been touched, no wires, no reloads, the battery went from staying at 100% for over a week, to discharging over about 4 days. My unit is either defective, or the battery is defective. Not sure, but I will probablyBizarre. I am probably going to give up on this doorbell, and get one which is powered only, i.e. no battery but a fully wired one. MC

0

•

27-08-2021 17:28:40

•

Reply

C

Caitlyn_Ring

Hi @MikeC1, happy to chime in here. Thanks for sharing another update on this concern. In this case, it may be best for you to touch base with our support team now so they can look into this further and troubleshoot more in-depth with you in order to determine the root of the problem. You can give o

0

•

27-08-2021 22:37:05

M
MikeC1
Hi,Just to let you all know I gave up on that doorbell. I bought a powered one which was on sale and it works perfectly. Just trying to work out how to 'swap' doorbells on my protect plan, but that's being asked in a different thread.Mike
1
•
26-09-2021 21:33:51
•
Reply