English

Ring Security Cameras

Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
M
Stick Up Cam Always Showing Low Battery in App
live-view
troubleshooting
battery-security-cameras

My battery-backed stick-up cam always shows that "Live view is disabled because has a low battery", even though the battery has been fully charged (and I've tried with batteries from other cams). I'm still able to (1) Re-init the cam through app without issues; (2) watch live view from Ring website; (3) manage the cam via app such as rebooting it, setting motion detection, etc. Is there anything wrong with the app or cam? Could anyone give some help?

1919

0

1

08-01-2023 04:29:42

Responses (1)

  • C

    Hi @MiaoRing. Please make sure you have the latest version of the Ring app by checking your phone's app store. You can find more information on the Ring app and mobile device compatibility [here](https://support.ring.com/hc/en-us/articles/4812209807124-Mobile-Device-Compatibility-and-the-Ring-App).

    0

    09-01-2023 11:46:41

      M

      Hi @Caitlyn_Ring- thanks for the reply. I double checked that the Android app is the latest version (3.55.1), so as the firmware version of the cam (which is Stick up cam battery Gen 3). I have the same issue with my iPhone Ring app. I have another same cam which is installed outdoors. But I can watch its live view normally.

      0

      10-01-2023 04:51:09

      C

      @MiaoRing Then I would suggest resetting the Stick Up Cam and performing a fresh setup in an attempt to resolve this. You can reset the Camera by holding down the setup button for at least 20 seconds. After the reset is complete, follow the steps under Set Up a Device to get the Camera reconnected to wifi. If this concern persists and you keep seeing this error message despite having a fully charged battery installed, please reach out to our support team at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406) for further assistance. If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.

      0

      11-01-2023 06:42:48

      M

      Hi @Caitlyn_Ring- I've tried resetting the cam but it doesn't work. I'll contact the support team. Thanks.

      1

      14-01-2023 07:29:57

      U

      After you have charged your battery and have replaced it in the ring stick up cam, you have to wait 30 seconds for the cam to reset before putting the base back on. Otherwise it still registers as a low battery. At least that was how it worked in my case.

      0

      02-06-2023 03:34:33

Didn't find an answer ?

Log in or create your Ring account to post a question and join in the on the conversation.

Most Helpful Members