Responses (2)

• M

  Marley_Ring

  The Jumper cable will simply disable the chime kit to provide power to the connected terminal. Adding a second cable to your rear terminal on the chime kit should also provide power there. Alternatively, you can power the second Video Doorbell Wired with a [Plug-In Adapter (2nd Generation)](https://ring.com/products/video-doorbell-plugin-adapter-gen-2). :)

  0

  •

  17-12-2021 05:53:11

  •

  Reply

  N

  Ndelviii

  If I remove the jumper wire does that mean the video pro doorbell will not get power or not get enough? I have a 16vAC 30VA transformer

  0

  •

  30-12-2021 11:50:32

  T

  Tom_Ring

  Hi @Ndelviii. The Ring Pro does not use a Jumper. It uses the Pro Power Kit. This must be installed to use the Ring Pro, as it helps regulate the power.

  0

  •

  03-01-2022 07:05:49

• K

  KarmaKamper

  I have a Ring Pro with a Pro power kit. I want to install a second ring on another entry door but how do I do that if I already have a Pro power kit on my existing chime?

  0

  •

  03-02-2022 08:17:37

  •

  Reply

  T

  Tom_Ring

  Hi @KarmaKamper. This Help Center article [here](https://support.ring.com/hc/en-us/articles/360022454432-Wiring-Diagrams-for-Ring-Video-Doorbell-Pro-Setup) has wiring diagrams for multiple Doorbell circuits.

  0

  •

  07-02-2022 10:21:06