Friedland D3230
 Does anybody know how I should be wiring this up with the bypass connector please for the wired Ring doorbell? Do I need to disconnect wire 3, attach the bypass and link it to the connector above it (0)? Thanks in advance.
2153 •
1 •
0 •
17-07-2022 01:43:24
Responses (2)
- S
Hello. Sorry, it is the Ring video doorbell hardwired, model number 5AT3T5
•0
19-07-2022 09:04:07
C@Sparch82 Do you mean the [Video Doorbell Wired](https://ring.com/products/video-doorbell-wired)? I know other retailers may not have it listed with the model name in the website listing depending on where you purchased it from, so I want to make sure we're both talking about the same Doorbell model based on the name of the device. You can find wiring diagrams for the Video Doorbell Wired in our Help Center Article [here](https://support.ring.com/hc/en-us/articles/4405783047188-Wiring-Diagrams-for-Ring-Video-Doorbell-Wired-). The jumper cable goes on your chime kit on the "Front" and "Trans" terminals, which indicate the front door and transformer respectively. Your chime kit should be labeled in a similar way. Alternatively, if there are only wires on two terminals, those two terminals are likely the front door and transformer. If you're still unsure on the installation, I'd recommend consulting a qualified electrician.
•0
20-07-2022 08:30:55
- S
UPDATE: Have managed to successfully re-wire and install the wired doorbell now. Photo is attached: Step 1: connected the supplied bypass wire into the connector, Step 2: removed the wire on the chime from Position 3 and inserted into the other side of the bypass cable connector, Step 3: connected the bypass wire onto position 1 of the existing chime. Hope that helps anybody else struggling to bypass their existing wired doorbell chime. 
•0
24-07-2022 11:35:27
•
UHello, It's maybe a stupid question but how can I see the uploaded image ? (I currently only see a link in a text format ) I have a honeywell D3230 that seems very similar to the Friedland 3230 and I want to connect my ring doorbell wired to it. A picture can with the solution can help me a lot.
•0
26-04-2025 08:48:52
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Caitlyn_Ring
Hi @Sparch82. If you could please share which model of Ring Doorbell you're installing, that would help other members of the Community assist you better as the installation instructions can vary from one model of Doorbell to another. For example, are you installing a Ring Video Doorbell Wired or a Ring Video Doorbell Pro? The name of your Doorbell should be on the original packaging and on the back of the device itself.
0
19-07-2022 08:05:53
•