Ring Security Cameras
Ring Floodlight Camera (wired) - No Power
So I installed the camera the other day, it worked for a few hours and now has no power - I have taken it down and fed power to it from a standard plug, but there is no power to it, When I power it on I am getting a little flash on the lights, but camera will not power on, or led flash when I press the reset button, or hold it for 15 secs. Video of what happening attached. Any advice on what to do? I bought it a long while ago and have only just installed it. Thanks https://youtu.be/O-24G3yA9W0
10388 •
0 •
2 •
25-03-2020 03:04:24
Responses (1)
- M
Hey @IanEagle! Your Floodlight Cam should certainly be powering up as long as it was installed to a junction box supplying the proper power, per the installation guide. As the Floodlight Cam utilizes high voltage, we are unable to advise any wiring or power related troubleshooting. That being said, the standard and best first step would be to ensure no light switch or dimmer switch is interfering with power, and the breaker is not tripped, or off. For power related concerns, we recommend checking with an electrician. If this concern persists, feel free to reach out to our [support team](https://support.ring.com/hc/en-us/articles/360036196372-Get-in-Touch) for a more in-depth look at the Cam. I hope this helps! :)
•0
26-03-2020 06:20:34
IThat's pretty unhelpful. I have of course checked the power supply, all is fine there. I have also wired it direct to a plug, exactly the same issue. The problem is with the device, not the power to it. Please advise.
•0
29-03-2020 08:00:25
EI have the exact same issue. it seems that the answer the RING has provided is useless. Have you tried other avenues to get an answer? TIA
•0
12-06-2020 03:37:22
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
IanEagle
Help!
0
26-03-2020 07:41:19
•