Ring Security Cameras

Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
D
How high must I install a new Junction Box for the Ring Floodlight Camera?

I plan on installing a Ring Floodlight Camera. But, since there is not a current floodlight where I want to install the Ring Floodlight Camera, a new junction box must be 1st installed. QUESTION: In order to have the motion detector part 9' off the ground as recommended by Ring, how high must I install the junction box? I need to know what the distance is from the **"top"** of the junction box to the **"bottom"** of the motion detector part.

3502

0

0

18-08-2019 03:58:58

Responses (2)

  • M

    Great question @DonC . We recommend you use a 4 inch round waterproof junction box. This can be mounted at 9 feet. The lights and camera are centered to be as level as possible with the junction box, for easy mounting and angling. Hope this helps!

    0

    19-08-2019 06:05:07

      D

      Just to make sure I am understanding you correctly. If I mount the center of the Junction Box at 9 feet, the Motion Detector can be adjusted so that the bottom tip of the Motion Detector will be 9 feet off the ground (as recommended by Ring). All of the pictures I have seen on Ring of the Floodlight Camera installed shows the Motion Detector to be below the Junction Box.

      0

      19-08-2019 10:00:55

      M

      That is correct @DonC . Just to clarify, we recommend the Floodlight Cam be mounted at 9 feet as this is optimal for light illumination, lens field of view, and motion detection. We are not looking for any one component to be at 9 feet, but the Camera as a whole will work best if mounted at that height. Check out the bottom portion of this [article regarding Floodlight Cam positioning](https://support.ring.com/hc/en-us/articles/360000124983-Proper-Positioning-for-Your-Floodlight-Cam), you'll see it loosely states "around 9 feet" as well as a quick tip about mounting higher being better than mounting lower. Let us know if you have further questions. Thanks!

      0

      20-08-2019 07:04:03

  • W

    The base of my Floodlight camera is 5" in diameter. How do you connect that to a 4" junction box?

    0

    15-06-2021 09:11:42

    Didn't find an answer ?

    Log in or create your Ring account to post a question and join in the on the conversation.

    Most Helpful Members

    T

    TonyMan

    1

    User
    Solution

    B

    Boone

    1

    User
    Solution

    J

    j0hnmsch

    1

    User
    Solution

    L

    LordP666

    1

    User
    Solution