Ring Security Cameras
Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
Optimized Charging Threshold
Using a solar panel, Ring says: If you have a Solar Panel connected to your Ring device, it will wait until the battery charge drops below a certain level threshold before recharging it. What is the threshold? My camera dropped all the way to 55% before I got on a ladder and unplugged and then plugged in the solar panel which essentially rebooted the system and it started charging. My status when not charging says connected. Ring support is terrible!
282 •
1 •
0 •
24-05-2024 00:46:01
Responses (2)
- C
@Petit Unfortunately, we are limited to general troubleshooting assistance here on the Community, as we do not have access to any device details. It's possible the cable is somehow coming loose, which is why the Solar Panel stops charging the camera, but begins charging it again after the cable is r
•0
10-06-2024 17:49:43
- C
Hi @Petit. This threshold is about 90% before the Ring Solar Panel will begin trickle charging the battery in your Ring Camera again. Disconnecting the panel and reconnecting it is a good troubleshooting step to take. Additionally, make sure the panel is receiving at least 3-4 hours of direct sunlight per day.Keep in mind that this trickle charge will not be as quick as when you plug the battery into a standard power outlet with the included charging cable. This means that the battery may drain more quickly than the Solar Panel can charge it, particularly if your Ring Camera is recording a large number of events.
•0
24-05-2024 19:55:17
•
PThank you Caitlyn_Ring. My camera/solar panel is mounted on a gutter and is difficult to reach due to my disability. Only once has the software initiated charging when the level was down below 80%. The last time, it was down to 55% and zero charging. When I do manage to climb a ladder and discon
•0
26-05-2024 14:42:58
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Justin_Ring
Hi @Petit. I am happy to chime in. You should not have to constantly unplug and plug your Solar Panel to your Camera to get it to charge. I would recommend trying to factory reset your Camera to see if it helps. To factory reset your Camera press and hold the setup button on it for 20–25 seconds and then reconnect it to your wifi. If you have tried this step and are still having the same concern, you will need to continue working with our support team to look into this further. You can also send our support team on Facebook a PM to @Ring.
0
27-05-2024 18:33:33
•