Ring Alarm
Browse posts, comment, and join in the discussion about Ring Alarm and Ring Alarm Pro.
Ring Alarm (2nd gen) base station chimes not working
Base station chimes, for example door chimes, are not working at the base station only. The keypad chimes ARE working. Base station chimes were working fine when I first stated setting things up, but have stopped. I've tried rebooting the base station. Volume is set at about 80%. Base station siren works just fine.
1181 •
0 •
0 •
08-08-2022 22:55:18
Responses (1)
- C
OK, I think I found the problem: I have a Ring Wired Spotlight Camera. Under the camera's mode settings > Disarmed mode, I had Chirps set to Off. This apparently disables ALL chimes for the base station, but NOT the keypad. I don't know if that's a "feature" or a "bug", but certainly not what I expected.
•0
10-08-2022 22:10:58
C@CandB You are correct that there is a Chirps option under the Modes setting, which applies to your Ring Alarm devices. When you tap the Mode Settings tile on any of your Ring devices, it will bring up the Mode Settings options for all of your devices. If you toggle the Chirps option back on under the Modes Settings, do you hear the chirp tones play from your Base Station when a Contact Sensor or Motion Detector is triggered?
•0
11-08-2022 17:32:32
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Caitlyn_Ring
Hi @CandB. Is there a specific Contact Sensor or Motion Detector that you've noticed does not have an audible chirp tone from the Base Station when the sensor is triggered? Or does this occur across all sensors? Do you have the Keypad situated near the Base Station, or are they in separate areas?
0
10-08-2022 18:18:06
•