Ring Alarm
First Alert Smoke/CO detector install
Since there is no documentation for installing the First Alert Smoke/CO detectors it is up to each customer to try and figure it out on their own. I bought a bunch of the smoke/CO detectors and when I began installing I started with the first one. It showed up in the Ring app with multiple devices so I thought there was a problem and removed it. Then I installed the second one and found it also had multiples... but recognized that was one for smoke and one for CO was showing up. Through the install process, it will end up only showing as one device. That is confusing to start with. I got all of the rest of them installed now and so went back to the first one to get it reinstalled. It will not install... it shows up in the app as a device that has not been installed but it will not pair with the app for configuration. How do I get it "reinstalled"?
1777 •
0 •
4 •
18-10-2020 12:38:38
Responses (2)
- M
I spoke to someone in customer service. For the record, here is how to solve this issue. It requires a factory reset of the First Alert alarm so that it can allow itself to be paired to the network again. To factory resent, open the battery door then hold the test button while closing the battery door. Keep holding the button until the second (and much longer) beep happens. That's it!
•3
20-10-2020 04:42:16
- C
Hey. Any more info on this? I just installed the smoke detector and got two devices. I removed and readied it but still got two. I didn’t hold the factory reset for the longer beep as described. Can ring provide any assistance with this? Why is this still and issue in an initial set up? Thanks Mark
•0
01-04-2021 01:01:33
•
THi @Coolpfeif. For this concern, please contact our support team for the next best steps. Please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). We’re taking additional steps to protect our team and help reduce the spread of COVID-19, so this has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support.
•0
02-04-2021 09:13:08
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Caitlyn_Ring
Hi @medicnick. Were you able to remove the one that is not fully added to your system? If it is showing up, please share a screenshot of how it is listed in the Ring App. I'd be happy to take a look and offer some help. :)
1
19-10-2020 08:57:49
•