Ring Video Doorbell
Wiring my Ring video to existing Friedland D3230
Looking to install a Ring Video doorbell but unsure of the wiring. The D3230 is listed as compatible, anyone wired a D3230 before? I only see wires going to 1 and 3, should these be bridged? do I leave as is and connect Ring as is? so many questions :slight_smile: 
3096 •
0 •
1 •
19-11-2021 05:06:27
Responses (6)
- A
@user3064 Can you please show how did your final wiring look after getting it done in a photo? I have exact same chime and not confident that I understand it correctly. Thanks
•0
01-02-2022 02:14:03
•
- G
 This is a slightly different chime, but the wiring is the same concept. You are doing this on the left side, taking the wire from 3 and putting it through the bypass, and connecting it back to the screw above 3.
•0
01-02-2022 07:28:56
•
- F
Mine ended up looking (and working) like this, hope this helps!  I feel that it'd probably work without the "bypass" which doesn't seem to be doing anything (perhaps someone else can illuminate me!).
•1
19-04-2022 01:25:59
•
- C
Hey neighbors, you can find the installation instructions for the Video Doorbell Wired [here](https://support.ring.com/hc/en-us/articles/360054984332-Installing-Ring-Video-Doorbell-Wired). If you are located in the UK, you'll want to reference [this](https://support.ring.com/hc/en-gb/articles/360054984332-Installing-Ring-Video-Doorbell-Wired) Help Center article instead. Other neighbors in this thread have also shared photo examples of what the wiring looking like on their chime kits. If you need any help with the installation of your Doorbell, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support. :)
•0
30-12-2022 10:11:19
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
groundhogday
Take wire 3, disconnect it, and wire it through the bypass cable (use one wago connector to join together, then bare end on the other side) to the terminal above it.
0
25-11-2021 01:37:07
•