Ring Video Doorbell
Browse posts, comment, and join in the discussion about Rings wired and battery doorbell.
U
How do I install jumpers on this set up
hardwired-video-doorbell
Help!!!Stuck on this set up. terminals are numbered 1, 2. & 3.2 cable pairs coming in, 1 pair goes to 1 & 3 the other to 1 & 2. Where do I stick the jumper lead or will Ring wired even work with this set up!!!
612 •
0 •
0 •
10-09-2022 11:20:14
Responses (1)
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Justin_Ring
Hi @user23137. You are going to want to find out which of those 1, 2, and 3 terminals indicate trans, front, and back. To help you figure that out, you will want to get the make and model of that pre-existing chime and look up a manual for it online. Also, verify that the transformer supplying power to your pre-existing chime follows these specs: 10-24 VAC, 40VA max, 50/60Hz. Once you have that information, the jumper cable will go on the terminals that indicate trans and front. The terminal that indicates the back will be left alone. If you are not comfortable taking these steps, we strongly recommend consulting a qualified electrician.You can also use the [Plug-In Adapter 2nd Generation](https://ring.com/products/video-doorbell-plugin-adapter-gen-2), which simply plugs into a wall outlet and is wired to the back of the Doorbell for power. I hope you find this information helpful.
0
12-09-2022 18:15:46
•