Responses (2)

• C

  Chelsea_Ring

  Hey @Gerh. You definitely can! You will want to make sure you go into the Ring app and link both Doorbells to the Chime once all three devices are setup. Once setup, you will need to do this one Doorbell at a time, but go into the Ring app \> Main Menu \> Devices \> Doorbell \> Linked Chimes \> and set a chime tone to be linked for Motion and/or Dings, and then you'll be all set! :)

  0

  •

  09-06-2020 08:04:42

  •

  Reply

  T

  throgmar

  When I set up the chime for the 2nd doorbell, it's no longer set up for the 1st one. Help?

  0

  •

  20-10-2022 03:31:14

• J

  Justin_Ring

  Hi @throgmar. If your Ring Chime is no longer chiming with either one of your Doorbells, you will want to verify it is still linked with your Doorbells in your Chimes settings. To do so, follow these steps: * Launch the Ring app. * Select the menu button (three lines, top left). * Tap Devices * Choose your Chime. * Select Audio Settings. * Select Chime Alerts. * Enable the bell symbol for the Doorbells and hit save on the top right. You can also try [rebooting the Doorbell](https://support.ring.com/hc/en-us/articles/7438395032980-How-to-Reboot-your-Ring-Doorbell-or-Security-Camera-from-the-Ring-App-) that is no longer chiming with your Chime. Another step you can try is to power cycle your Ring chime by unplugging it for 10 seconds and plugging it back in to see if it helps. If you have tried these steps and are still having the same concern, give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.

  0

  •

  21-10-2022 06:08:45

  •

  Reply