Ring Security Cameras
Wired indoor camera keeps showing disconnected
I'm having issues with a new wired indoor camera disconnecting or showing offline. I power cycled the device and it starts up like a new device. A few hours after setting up the wifi connection it shows offline again. So I power cycle the device again and starts up again like a new device. All of my other devices are connected and working still. The rssi on that device was 42 when it was last connected and the firmware is up to date. I did check my router and the device is showing it is disconnected from the wifi. Any ideas what my issue might be?
2051 •
0 •
1 •
03-06-2020 10:26:48
Responses (2)
- C
Hey neighbors! Since it seems you both have already reset the camera and/or tried setting it up again and to no avail, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). We're taking additional steps to protect our team and help reduce the spread of COVID-19. This has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support. Let me know how the call goes, as your answer may help the other neighbor or neighbors that can come to this thread! :)
•0
04-06-2020 09:49:50
- G
I have 14 Ring devices. 2 of them are the powered Indoor cameras and they are regularly offline. What I notice is that they are generally connected to an AP, albeit one that isn't necessarily the closest. None of my other devices have dropped in a couple of months. These drop daily. They also do typically come back on my themselves. Sometimes I have to either reboot an AP or disconnect the device from an AP.
•0
26-02-2021 03:42:51
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
andyw
I am having similar issues. My indoor cam was fine for a while and now it just disconnects shortly after rebooting and reconfiguring/reregistering it. It seems to factory reset and finish the connection process, even show live video -- for several minutes, then it just shows as disconnected, blue light always on. It is within line of sight of the access point, and used to work fine. I have half a dozen other ring cams which are fine. Am thinking its a hardware issue, but wanted to check here before sending it back.
0
03-06-2020 09:28:10
•