Ring Security Cameras
Ring Floodlight Cam Wired Pro's light is almost always on at night?
Had my Ring Floodlight Cam Wired Pro installed for more than a month now. I noticed the light is almost always on at night. I would manually turn it off, but a few minutes later it's back on with no motion detected. Under Device Setting-Light Settings, I have Motrin-Activated Lights set to "on". I have the Motion Zones for Lights set at minimum, Motion Sensitivity set at minimum, no Light Schedules made, and no Light Groups set. Please advise... Paul
2341 •
0 •
1 •
01-03-2022 07:37:19
Responses (5)
- P
Hi, sorry for the late reply, the floodlight cam is mounted above the garage door, so about 7 foot up. Here is a capture. During the day, the light is off. But at night it is mostly on. Even after manually turning the light off, it comes back on after a few minutes with no motion noted. 
•0
13-03-2022 04:26:47
- C
Hi @pjekoo. Thanks for sharing that screenshot, thought it is hard to speculate on what might be causing the lights to be triggered at night since this screenshot is from during the day when this issue is not occurring. If you haven't done any troubleshooting steps yet, a good place to start is to reset the Camera by holding down the setup button for at least 20 seconds. After this reset is complete, set the Camera back up in the Ring App using the steps under Set Up a Device. Let me know if you notice any change in your Floodlight Cam's behavior.
•0
14-03-2022 10:49:00
•
- P
Hi, I did as you suggested, and it's the same. I'm just wondering if everyone's floodlight are all like this? Paul
•0
21-03-2022 05:41:31
•
- B
Hello, I'm having the same issue! My cameras have been reset & my firmware says up to date. Any news on the fix for this?
•0
30-06-2022 05:34:23
•
- C
Hi neighbors. Again, I don't want to speculate as every neighbor's home and environment will differ. There may be something triggering the lights at night, so I'd recommend reviewing your light settings on your Floodlight Cam. You can find more information on the settings available for your Floodlight Cam's lights in our Help Center Article [here](https://support.ring.com/hc/en-us/articles/115004155866-Controlling-the-Floodlights-and-Light-Settings-on-Your-Floodlight-Cam). If you're not able to determine the cause of what is triggering the lights on your Floodlight Cam, I'd recommend following up with our support team at the time that you're experiencing the concern with the lights. Please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
•0
30-06-2022 08:05:56
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Tom_Ring
Hi @pjekoo. How high is your Floodlight Cam mounted? If possible, try uploading a screenshot of the view from your Floodlight Cam. This will help the Community identify anything that might be causing excess activations.
1
03-03-2022 05:19:43
•