Ring Security Cameras
Ring camera turns false motion detection with green screen and loud click.
It has done this twice now. Can anyone explain what is happening? Live view always seems normal. The camera turns on with a motion alert and the video seems normal. Then color goes from light to dark green and then a loud click is heard on the video followed by what sounds like a voice, then video goes to normal again. This happened twice in the last 5 days. Any help on what is goin on?
7591 •
0 •
1 •
06-04-2020 09:52:12
Responses (5)
- T
[https://ring.com/share/6811118275167896789](https://ring.com/share/6811118275167896789)
•0
07-04-2020 06:08:42
C@Tmeyer It looks like the IR filter on the camera to switch between night vision and not at night time is getting stuck going back and forth. Therefore, when it's stuck it does this loud clicking sound, temporarily distorting the color of your video as it re-adjusts once the filter is fixed. First thing I noticed is that it seems like you've installed this in a dark corner/low level in the room. Could you possible install this on the wall, slightly higher up but still looking at the angle you want, or even from the ceiling? Keeping this in a corner is ideal for your angle, but the higher up it is and the better chances it has to see the lighting in the whole room, the more this should help. Additionally, if the IR filter is stuck like this, try shining a flash light in front of it for a couple seconds to see if that helps it recognize when it's day time and then adjust easily for a more permanent look at your view, without the discoloration. I believe that once you adjust the installation height, you shouldn't have to do the flash light trick, but it's something to do in addition if it ever gets stuck in the future. You can test out this theory without actually moving the camera if this is not a possibility! The hallway that the camera captures, can you turn the hallway light on and test out to see if you have this kind of video happens when there is more light? If this does not happen when there is more light, then you have found out the installation place is in a darker area, thus resulting in the IR filter switching back and forth. From there, I recommend to find the best new place for the device.
•0
07-04-2020 07:38:02
TThe camera is in the middle of the room near a wall. It is about 3 feet off the floor. I will try it wall mounted in the corner of the room.
•1
07-04-2020 08:05:21
- U
Mine is doing the same thing. Starts out full color, then a loud click and it goes to a dark mode very much like the video above.
•0
12-12-2023 05:40:37
•
- J
Hi @user70970. If you have tried the steps mentioned in the solution and are still having the same concern, give our support team a call for further assistance. Give our support team a call at one of the numbers available here.
•0
13-12-2023 05:58:46
•
- U
@Justin_Ring @Chelsea_Ring I am with AWS and trying to connect with the Ring Community Managers. Can you slack me at kmandia? Thx!
•0
18-12-2023 02:55:48
•
- S
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
•0
17-01-2024 02:56:02
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Chelsea_Ring
Hey @Tmeyer. Can you please attach a share link of this video and the discoloration? Also, if you're able to record the loud click and share that with us too, that would be greatly appreciated!
0
07-04-2020 05:35:29
•