Responses (5)

B

Brad

I do not have a floodlight cam, but people mode works well on my stick-up cams. I was also having trouble with squirels and this solved it. Once you turn on people mode you cannot adjust the sensitivity, the camera optimizes itself at that point. But you can still set zones.

1

•

22-12-2019 00:20:09

•

Reply

J

jaywohlfeld

Where do you find this option? I have the same issue with Squirrels. Thanks!

0

•

22-12-2019 14:17:03

C

CrazyCat

Go to the Device and Select Motion Settings. Should see a People Only Mode. I turned it on and it solved my squirrel problem. Though it did record a cat and possum so not perfect but much, much better.

0

•

22-12-2019 14:31:44

J

jaywohlfeld

I do not have that option. I checked both my Android phone app (which updated today) and Ipad app. The only options under motion settings are: Settings: Motion Detection Motion Verification Advanced settings: Motion Schedule Motion Frequency Even under those there is no People Mode. I do not

0

•

22-12-2019 15:00:37

C

CrazyCat

Which camera do you have? My floodlight camera has very different Motion Settings: - Motion Zones - People Only Mode - Motion Sensitivity - Adv Setting: Motion Schedule I'm also using Android.

0

•

22-12-2019 17:32:38

J

jaywohlfeld

I have a StickUp Cam Battery (outside) and StickUp Cam Plug In (also outside). Jay

0

•

22-12-2019 21:10:05

K
Kp3
I recently installed the ring3 plus 2 locations. The front door is set for people only. I have discovered that if one approaches the door in full winter garb (including beanie/hat, it will not record or take notices. If hat removed, it will. This is a problem for those of us in most of USA during winter months or in any area since a thief wearing a beanie would go undetected.
0
•
29-01-2021 20:51:31
•
Reply
JH
JGW-Houston
Same issue with my new Floodlight Cam. Sensitivity turn all the way down. People mode on.BUT it still picks up squirrels, sunlight/shadows, falling leaves. Jeez, guys! Can't you do better than this?
2
•
22-11-2021 20:25:22
•
Reply
C
Caitlyn_Ring
0
•
08-12-2022 21:23:51
•
Reply
I

IssyUK

I can’t find it but mine doesn’t record if our car turns up and drives straight into the garage or if someone drives onto the drive then off again without getting out. I’d like to turn it off if possible but can’t find it.

0

•

29-06-2024 05:51:37

•

Reply

J

Justin_Ring

Hi @IssyUK. I would recommend looking into checking if you have Smart Alerts on. If you do, toggle on Other Motion. If it is enabled and if it's not detecting vehicles, try toggling off Smart Alerts to see if that makes a difference. I would also suggest increasing your Motion Sensitivity. Let me kn

0

•

01-07-2024 23:02:25