Ring Security Cameras

Browse posts, comment, and join in the discussion about Ring’s indoor and outdoor cameras.
S
Indoor cam won’t connect
hardwired-security-cameras

Hi all, My indoor cam had been working fine for afew weeks then randomly lost connection (offline). I tried all sorts to reconnect it but to no avail. I removed it from my list of devices to try and setup from scratch again. Now I cannot get the cam to go into setup mode to reconnect it. Is there a way to reset them back to factory setting as it still connects and shows up on my Wi-fi and assume this is why it won’t go into setup mode as it still knows the Wi-fi settings? Any help would be appreciated Thanks.

4350

0

4

27-06-2020 05:42:31

Responses (3)

  • C

    > @Slickbb4 wrote: > Hi all, > My indoor cam had been working fine for afew weeks then randomly lost connection (offline). I tried all sorts to reconnect it but to no avail. I removed it from my list of devices to try and setup from scratch again. Now I cannot get the cam to go into setup mode to reconnect it. Is there a way to reset them back to factory setting as it still connects and shows up on my Wi-fi and assume this is why it won’t go into setup mode as it still knows the Wi-fi settings? > > Any help would be appreciated > > Thanks. Hold the button down for 30 seconds should reset it

    0

    27-06-2020 06:59:14

      0

      Having the same issue. Resetting flashes the blue light for a sec or two, then nothing.

      0

      28-06-2020 07:05:37

      S

      Thanks for the reply. Yes I have tried the 30 second reset and all the other reset procedures I have read about but nothing seems to work. The blue light comes on approx every 30 seconds for approx 3 seconds every time but will not flash to indicate setup mode. I’ve tried searching for it with chime pro and to add to home network but neither will complete. I’m just wondering if there is a way to completely reset it so it forgets the network settings it has saved from when it did work?

      1

      02-07-2020 08:17:17

      M

      I’m having the same issue, camera was working. Now when I try to reset, it only flashes blue and white. It keeps telling me it can’t join network because it never appears in my network list.

      0

      02-07-2020 05:21:48

      C

      Same exact problem

      0

      03-07-2020 03:10:12

      F

      Same problem here. Single flash every ~35 secs. Light on for about three seconds then repeat.

      0

      03-07-2020 04:50:36

  • J

    Same problem after multiple attepts at reset called support and they are sending a new camera.

    0

    04-07-2020 02:59:03

    • O

      Same problem. Have tried all and does not work. Tried connecting from both my WIFi and Chime Pro network. It just fails to connect to it and acts exactly the same as the rest have explained here.

      0

      05-05-2021 03:50:53

      Didn't find an answer ?

      Log in or create your Ring account to post a question and join in the on the conversation.

      Most Helpful Members