If using solar panel (with Stick Up Cam), should I choose "wired" mode or stick to "battery" mode?
Hey all. Just bought some Stick Up Cams (battery ones), with the solar panels. Fitted the first two a few days ago and all good (suggested solar charging), then noticed (perhaps the app got an update) that the app now sees the camera as powered by an "Electrical Socket" (I know that technically it is with the solar panel connected), and as a result it's suggests putting the camera into "wired" mode (not battery). I've done it on one of the cameras and now I have more options in the app, plus it seems to take more snapshots and I guess uses more power to be quicker at responding to motion events etc. My question really is, should you use "wired" instead of "battery" when using the solar panels, as obviously at night (and other low light times) the panels won't generate enough power so it will be using just the battery and I guess drain quicker? Anyone have any experience or advice please? Thank you!
26885 •
0 •
5 •
15-07-2020 03:23:55
Responses (5)
- M
When I made this switch from battery to wired mode, my battery is not being charged by the solar panel anymore. I took out the battery charged it up manually and trying to switch it back to battery mode but the camera is not going to setup mode now.
•0
03-08-2020 04:17:16
•
CHey neighbors! If you are using the solar panel option for the Stick Up Cam or Spotlight Cam, please use the Battery \> Wired mode. This is because the solar panel needs to charge the battery, and this is done properly in the "Battery Mode." If you have tried to put it back to battery mode and cannot set up the device to do this or are having issues in battery mode, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406).If you are outside of the US, please go [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support.
•1
03-08-2020 09:35:36
GChelsea\_Ring that's a confusing answer the mode options are "wired" or "battery". What does "battery \> wired" mode mean? . I am still not clear on which is correct for the solar panel. I wish it said connected to solar like the spotlight cam does.
•0
05-09-2020 03:41:07
RI have mine set to “battery” and have no issues with it charging. I did have it set as “wired” when they made that confusing update a few months back and it would not charge.
•0
05-09-2020 04:04:44
T(9/5): I had the same question after installing my stickup cam on 9/4. I first installed the cam without the solar panel connected to the cam. I went through the setup and got the cam up and running without issue(s). When I plugged the solar panel into the cam, a popup window appears and suggests to set to "wired" mode for "constant power and improved motion detection". That had me scratching my head as one could take that as implying that the solar panel would be supplying "constant power" to the cam. No?? I set it to "wired" mode but then decided to set it back to "battery" mode. I later called tech support to ask what I should set it to..."wired" or "battery" mode. The customer rep was stumped also. She could only suggest that I leave it on battery mode and monitor the cam's battery status to see if it is being charged by the panel. As of right now, the jury's still out as it's noon here (Texas) and there's only been about 4 hrs. of direct (morning) sun on the solar panel since installation (initial battery charge at 92%). And due to having the panel mounted on the east side of the house on the fascia, the panel's mounting bracket is so LAME that the panel can't be tilted flat (perpendicular to the sky) to get more than just the morning sun. That bracket needs to be longer in length so the panel doesn't hit the edge of the roof and stop at about a 45\* angle; or else have a pivot to where the panel can be rotated to landscape mode/position. Then it wouldn't hit. (9/7) update: after a couple of mornings of good direct sun, the battery doesn't appear to be charging. If anything, it's decreased 3 percentage points (down to 89%); and that's even after disarming the camera in the afternoons. Need to figure out a way to reposition the solar panel for longer periods of direct sun. 2 watts of output power from that panel is pretty anemic...and dare I say OVERPRICED.
•0
07-09-2020 08:01:58
TMore useful info here related to this topic: [https://community.ring.com/t5/Accessories/How-you-know-if-your-solar-panel-is-connected-A-quick-check/m-p/58023#M2213](https://community.ring.com/t5/Accessories/How-you-know-if-your-solar-panel-is-connected-A-quick-check/m-p/58023#M2213)
•1
08-09-2020 11:31:24
- B
I had the same issue. Connected the solar panel to a stick up cam and the app had an alert saying switch to wired. Once I did, the battery would drain and die quickly without any recharge from the panel. I switched back to battery mode and it’s stayed powered continuously in a busy alley. Be nice to see the app updated to avoid the confusion.
•1
02-07-2021 09:27:37
•
- U
@Chelsea_Ring How do you stop the notification that tells you to switch to wired mode?
•1
25-11-2023 03:30:53
•
- S
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
•0
25-12-2023 03:31:13
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Caitlyn_Ring
Hey @risky\_boy. You are correct that the additional features offered when the Camera is set as wired may drain the battery more quickly. When using a Solar Panel for your Stick Up Camera, it's important to ensure that it receives at least 4-6 hours of direct sunlight a day in order to provide an appropriate trickle charge to the Camera. With that said, how quickly the battery drains in spite of the Solar Panel also depends on how many motions and Live Views the Camera is recording each day. If you're concerned with battery life, I would ultimately recommend utilizing the battery-powered option as the Solar Panel is ideally meant to keep the battery topped off rather than offer continuous power the way a wall outlet would.
0
15-07-2020 05:18:31
•