Ring Alarm
Contact Magnet Cover 2nd Gen.
How do you remove the magnet cover on a Ring 2nd generation door contact? I want to use screws to mount. I have installed using the adhesive strip. Thank you.
1687 •
0 •
1 •
25-05-2020 09:55:54
Responses (1)
- A
Yes this bothered me for awhile as the tab inserts on the back side of the magnet do not give you access to take the sensor apart. I used a small enough screw driver flat head and pulled with enough force to pry the 2 pieces apart. Also by trial and error I figured out that a #4 by 1/2 inch wood screw works with a 5/64th bit to mount the sensor. Screws for me mount better on windows that get full sun than the provided tape - on my old security system the tape would eventually melt off in the summertime on super hot days.
•1
22-06-2020 01:08:00
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Chelsea_Ring
Hey @Christies57. Are you trying to pop off the cover of the magnet, so that you can get the smaller magnet on the inside, like this image below? 
0
26-05-2020 05:27:28
•