Ring Video Doorbell
Doorbell will be mounted lower than recommended
In order to replace my existing doorbell with a Ring, it will have to be mounted lower than the recommended 48 inches. The camera will be approximately 39 inches abve the ground. Should I mount it flat or attempt to mount it angled up? If the latter, what would be the recommended angle I should shoot for? Thanks!
6428 •
2 •
0 •
19-06-2020 07:15:45
Responses (2)
- W
Caitlyn, Thank you for the reply. The door is 50-60ft from a street that gets some traffic, but not busy by any stretch of the imagination. There is one step up to a small 8' x6' porch in front of the door, but that step is 8 ft away from the front door. Not really sure what Ring I would get. I'm one to usually get the latest model, but am open to whatever model works best for my situation. Thanks!
•0
22-06-2020 09:12:49
C@wxmanrocks Thanks for sharing that additional information. I'd recommend taking a look at our Doorbell Buyer's Guide [here](https://support.ring.com/hc/en-us/articles/360035250032-The-Ring-Doorbell-Buyer-s-Guide), as it will list all of the specifications of our Doorbells and help you decide which one may be the best fit. Overall, you may have some motion detection concerns if it is mounted too low but if you get one of the battery-operated models, you can mount it higher than your existing doorbell circuit. This may be the better option in your situation, and the Buyer's Guide will let you know which models run off of battery power.
•0
23-06-2020 03:14:30
WCaitlyn, Unfortuately mounting it higher is a non-starter-I have vinyl siding and my replacement doorbell needs to cover the hole that is there. Not looking good. Sigh.
•0
24-06-2020 12:47:16
CHi @user65032. As mentioned, you may have some motion detection concerns when the Ring Doorbell is mounted either lower or higher than the recommended height. Everyone's home and environment is different, which will also affect motion detection to some degree.
•0
06-11-2023 07:54:09
- U
I am looking at installing a Ring Video Door bell - but it's an old-fashioned style door for which the building has two flat. The highest we could go is around 105 cms, Alas, above that there are expensive glass panels - so we can't risk damaging any of them - as leading to a potential costly replacement. What can we do. Other neighbours have other brands, and they keep low. Hmmm Any advice comments helpful /appreciated
•0
25-09-2024 03:23:32
•
JHi @user_d94716. As mentioned in the thread, if you mount your Doorbell lower than what is recommended, your motion detection may not work correctly. We do have mounts available on Ring.com called No Drill Mounts that do not require drilling. These might benefit you for your installation. You can find those mounts here.
•0
26-09-2024 04:32:18
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Caitlyn_Ring
Hey @wxmanrocks, we're happy to offer some guidance here. Which Ring Doorbell were you looking to replace your existing doorbell with? We do recommend a mounting height of 48 inches as mounting it too low or too high can impact the motion detection. Also, do you have stairs leading up to your front porch, and does your door face a busy street? These are other factors that can affect the angle at which we may want the Doorbell installed.
0
22-06-2020 06:22:44
•