Ring Video Doorbell

Browse posts, comment, and join in the discussion about Rings wired and battery doorbell.
K
Video Showing Lines All of a Sudden
hardwired-video-doorbell
battery-video-doorbell
cs-support

Hi. I’ve been looking through some of the videos that have been captured at night and lately they all have horizontal lines in them which makes it a bit hard to view. Anyone seen this before or have a fix? Picture attached as an example.

22188

1

22

10-08-2020 04:27:08

Responses (37)

  • C

    This is also happening to me in the past week or so. The battery is 100% charged, the unit is clean, and this occurs only after dark so the issue is not low power or weak WiFi. During the day it works normally. It’s seems like it’s getting worse also. The doorbell itself is unusable after dark because it’s not picking up motion at all.

    1

    14-08-2020 10:02:16

      C

      I completely reset the doorbell, set up as a new device, and even swapped out the battery with my spare. The problem with the lines has begun again and it appears to be getting gradually worse. It also seems like my motion notifications after dark are decreasing as the lines increase. Any ideas?

      1

      02-09-2020 01:35:13

      R

      I was wondering if anyone got a fix for this? Mine started doing this last night, previous nights have been fine. I did change the battery the day before so that's should have been fine but it appears is dropped 20% in one day which it doesn't normally do either.

      0

      19-09-2020 02:41:23

      D

      I have the same problem. Just started tonight. WiFi strength and battery level both ok

      0

      25-10-2020 12:15:42

      C

      @Ring — please stop with the tone deaf replies. Several people have this issue. Daytime video is fine. Nighttime video is trash. There is clearly a problem on Ring’s end. Signal strength doesn’t just change at night to a point the device is unusable. I understand blaming the customers WiFi is the easy out, but please escalate this to a team that has the capability to investigate and issue an appropriate repair.

      6

      25-10-2020 01:34:01

  • M

    I have this problem. It started about one week ago and night vision is seriously poor and useless footage, affects motion detection too. I used your speed checker and have 33mbps download and 8.8mbps upload. No changes to my WiFi setup. We need help resolving this urgently.

    2

    27-10-2020 03:23:07

      S

      Yeah. I've been dealing with this for over a week. My quality after the reset and changing the battery has gotten even worse. Look at the pic attached. I can't see anything. A man was at my door but I can't hear nor see him. This is unacceptable. It's not our WiFi signal changing everyday between day and night. Every other thing including other camera work. I called ring but due to COVID, reaching someone after I get home from work has been impossible. Ring needs to fix this.

      0

      02-11-2020 11:48:10

      A

      Sadly having the same issue. battery 100% Wifi signal strength 78% and problem only during the night. Same router in same position. It would be nice if someone in customer support started looking into this and help.

      2

      17-11-2020 10:41:12

      B

      I'm having the same issue in the last week. Only during night vision use. Battery and wifi strength are fine.

      0

      18-11-2020 01:10:09

      O

      mine is a similar problem but with a vertical line and half the picture being clouded over ,, i am new to this i only bought it a few days ago it was fine in the beginning although the night vision is poor quality in my opinion, i have tried live chat who are a waste of time asking the same question and talking about a camera not the ring doorbell 3

      1

      18-11-2020 06:12:10

      C

      I'm still having issues with mine. No surprise. My battery and WiFi are fine, despite what Ring says. However, now that I have installed holiday lights on the bushes directly in front of the doorbell, the added light is apparently preventing Night Vision from kicking in. This has essentially eliminated the white lines that make video unusable. As soon as the lights on the bushes kick off, I stop getting notifications and the white lines are back. Anyone else care to test this? Ring hasn't shown any interest in a fix.

      0

      23-11-2020 10:13:39

  • J

    Same issue here. Relieved that it’s not just my unit. Now hopeful for a hot fix from Ring.

    0

    23-12-2020 08:56:15

    • C

      Same issue. Has gotten worse over time. Only at night, and my other doorbell 2, which actually has less wifi strength, has never had this problem. This is an example of the night vision I have now. ![Screenshot_20201228-185839|243x500](upload://b9H47kDFAswrj28uEBaljuYyNfA.jpeg)

      0

      29-12-2020 12:00:01

      • B

        Just chiming in to say I'm having the exact same problem with the video feed at night. Wifi is strong, battery is charged, and daytime video is just fine. The issue appeared out of the blue earlier this year. It definitely seems to be a software issue! @Ring are you aware of this and working on a fix?

        0

        02-01-2021 12:07:44

        Didn't find an answer ?

        Log in or create your Ring account to post a question and join in the on the conversation.

        Most Helpful Members

        C

        Caitlyn_Ring

        1

        User
        Solution

        J

        Justin_Ring

        1

        User
        Solution

        U

        user_f39aec

        0

        User
        Solutions