Responses (4)

• L

  leefc

  I have this same question. @mitchell - did you ever find an official product? Or a 3rd party option?

  0

  •

  29-04-2020 07:58:27

  •

  Reply

  M

  Mitchell

  No, never found an official product to corner/angle mount the Ring Video Doorbell Elite, the other angle products I found did not seem to be waterproof so would not be acceptable. I gave up on the corner/angle mount, and could not mount it flush (it is on some type of architectural concrete wall), so I used a single-gang outdoor surface-mount plastic box, [here](https://www.homedepot.ca/product/carlon-outdoor-weatherproof-fse-single-gang-pvc-device-box-1-2-in/1000101187).

  4

  •

  29-04-2020 10:14:00

  C

  charltond317

  Have you made any progress with this query? Maybe and aftermarket product? Perhaps you could just publish the dimensions needed to be compatible with the Pro Elite. I might be able to work up a 3D printed version if I knew what was needed.

  0

  •

  13-07-2020 06:47:19

  M

  Mitchell

  The Ring Video Doorbell Elite uses a standard single-gang electrical enclosure, so you could copy that for the dimensions. But the enclosure must be water-proof as the doorbell has a standard Ethernet connection on the back.

  2

  •

  13-07-2020 08:18:49

  M

  mremmert

  Really should be advertised as such. Also disappointing, because until you put it up you don't necessarily know if you will need an angle. This was our first ring doorbell we got and we are disappointed with it because it needs angled. It also says it fits standard junction boxes, but as well all know walls are janky and of course ours doesn't fit in well.

  0

  •

  15-08-2021 10:14:35

  H

  handy

  Did the team ever come back to you? I need this for my Elite, didn't realise it wouldn't work as well from where it is installed, Really need the bracket.

  0

  •

  24-08-2022 05:45:41

• C

  Chidyausiku

  I found and purchased this: https://www.ebay.com/itm/Ring-Video-Doorbell-Elite-35-mounting-bracket-wedge-/324624388887?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0 Will check it out and share how it goes.

  1

  •

  10-10-2021 06:30:52

  •

  Reply

  B

  bomagu

  @Chidyausiku did it worked? :slight_smile:

  0

  •

  04-01-2022 02:02:08

  G

  gstav

  I also purchased this 3D printed angled bracket from the same EBay seller. It’s very basic but the Doorbell Elite fits inside nicely. I will place a gasket between the brick and bracket to prevent water infiltration. 

  1

  •

  17-08-2022 12:15:51

• K

  kpcos

  have purchased 2 Ring elites with chimes for the poe connectivity, just to discover it doesn't capture the bottom of the door or allow you to see packages due to the flush mount. Anyone have any success with angling or buying a wedge to aim camera more to ground to capture packages. Most expensive ring with least user adjustments. Don't want to start over and looking for any suggestions

  0

  •

  21-10-2022 01:26:20

  •

  Reply
• J

  Jimgggg

  I also need a corner kit for my Ring Doorbell Elite. Is Ring going to make one? Seems like there is demand for it.

  0

  •

  16-03-2023 12:29:58

  •

  Reply