Ring Security Cameras
Low Battery Notice on a Wired Stick Up Cam?
I've got a brand new wired stick-up camera. In the app, I'm getting the following error: _"Live View is disabled because [camera name] has a low battery._ _Even though [camera name] is hardwired, excessive use or cold temperatures can affect battery life."_ Again, it's a PLUG-IN camera. What gives?? Thanks, MT
62059 •
0 •
325 •
31-03-2020 02:45:14
Responses (100)
- M
I have not figured it out. Just got the camera yesterday and still getting the notice--not always, but almost always. I also don't understand why the snapshot feature isn't an option with the powered Stick Up camera. It's identical to the floodlights without the lights. It seems like a pure app restriction, not a hardware restriction. Arrg.
•4
31-03-2020 01:48:09
CHave you called RING about it? They are on west coast and I'm on east coast, so I'm gonna call when I can. We have another stick up camera that is only a couple months old and haven't had this issue. We have only had this one for a couple weeks.
•1
31-03-2020 02:30:04
ISame problem here. Got the camera yesterday (March 30th). Live view not accessible because of low battery even though it's wired. I tried a factory reset a couple of times. Tested my wifi access, firmware seems up to date cam-1.4.15200. Pretty frustrated by the situation.
•7
31-03-2020 04:48:16
TI'm in Minnesota, at work now when I get home I'm going to try a few things, I was hoping somebody from ring would be monitoring these posts and maybe get back to us. Don't even know who to call! So if you are monitoring let us know what's going on! My wife has the app on her phone to same thing no live view says low battery( again we have no batteries in the camera I think it's a 3rd generation, only corded). I have a doorbell Cam, and a spotlight cam, have had them for about seven or eight months, absolutely no problems work great, don't know what is with this camera. Please ring let us know!!
•4
31-03-2020 06:18:43
- C
That's funny, because ours is saying the same thing....on the same exact day as yours. It also, is wired.....and it's only 2 weeks old!
•3
31-03-2020 02:13:31
•
MYou're lucky! I got the camera yesterday. Charged the battery, and it already shows low battery! ?
•0
04-07-2020 07:22:09
- H
getting the same prblem wth my wife's phone and my 2nd phone. but not with the phone i used to set up the divices. it annoying.
•2
31-03-2020 09:00:59
•
SHaving same problem. Just posting to see if my "vote" for a fix helps with the Ring folks.
•0
04-05-2020 02:47:40
Laside from the low battery message on these wired stick ups, anyone else noticed that there are no toggle options in their video settings for the colored night vision mode? Seems like the wired cams are being recognized as battery powered only.
•2
04-05-2020 05:51:07
- T
I was able to get my live view to start working again. I had to uninstall my ring app reinstall the Ring app from the Google store. Once I was in the new app I had to go up to the upper left-hand Corner going to the menu go down to the new features and enable the snapshot feature and event history timeline, it does look a little different when you tap on the camera view but it was working I hope it works for the rest of you. Troy
•2
01-04-2020 10:42:48
•
CWell Ring is aware of the problem because I called yesterday. They said they have had several calls. However, the problem was not resolved by the associate. She said it would be passed on to the proper deptartment to fix the issue. We shouldn't have to unistalled and reinstall to fix the problem. Ring should be fixing the problem or sending a replacement camera....afterall we all JUST purchased these cameras. We have another stick up camera we bought in December and it hasn't had this problem. So obvisouly these cameras we all have are a newer version and can actually take a battery for a back up. You have to purchase the battery for it.
•4
01-04-2020 01:51:26
AI'm getting the same low batery notice on all 3 of my WIRED stick up cams. All are mounted up high and require an extension ladder to access. I will be returning my system if Ring's "fix" requires me to climb a ladder every time someting like this happens
•5
01-04-2020 07:04:55
HI suspect this started occurring with the latest Ring app update. My Stick-Up Cam Wired is also just 2 weeks old and it was great until the app update a couple days ago. Sadly, that app update DID fix 2 issues I've had with Smart Lighting so it's been a mixed blessing. Hopefully, Ring will get it all sorted out quickly and release another app update which fixes this "Low Battery" issue (especially since the camera has NO BATTERY because it's wired).
•2
02-04-2020 05:31:45
MGreetings - I'm reposting my own post from another thread I started because it solved this problem and the other (no snapshot on gen-3 cams). ——————————— So, I have a 10-minute, non-adjustable snapshot feature as of today on my brand new Gen-3 Stick-Up Cam. No idea what I did made it work or if there was a firmware update, but here were my steps: - I reset the camera in my office (so it was super-close to the router). - Using the Android app to set things up, I skipped the QR code scan and just chose to install it without scanning a code. - I went through the process, "Rome wasn't built in a day..." yadda, yadda... - But, when it got to the updating firmware screen in the app, I just let it sit there despite not seeing any lights at all on the device (the screen says to wait for the blue light to finish flashing and there's a skip button... I just let it sit). - After around 7 minutes, the forced tutorial checklist came up on the app and I went through it all until complete. - After that, I started seeing snapshots on the dashboard next to my other three cameras but instead of every 30s, it's every 10 minutes. Better than nothing. Marly from Ring just said on this thread (as did another customer) that Gen-3 doesn't support snapshot. So they must've done something or I REALLY should go play the lottery tonight. Also, while I did set the camera up on an Android phone, the snapshot is showing up on the iPad I use as a dedicated camera monitor. As we all probably know by now (and if this works for you), this could all break tomorrow. The devs seem to dig toying with our emotions by giving and taking features from us. Sigh. Good luck!
•0
03-04-2020 02:13:29
HMy "Low Battery" resolved itself around dinnertime tonight (~6 PM EDT). I did absolutely nothing to fix it but all of a sudden, my camera once again reported that it's power source was "Power Outlet" (instead of "Battery") and the Batter Level was "Unknown" (instead of "Low Battery") as it should as there is NO battery. Unsure of what happened but it's all working again including my Live View and motion detection.
•2
03-04-2020 02:21:30
- M
We had the same issue. Our camera has been installed for several months and working fine. But I noticed a day or so ago that it had a red battery symbol in my ring app and it said battery was at 8%. It doesn’t even have a battery in it. We climbed a ladder, took it down, unplugged and replugged it in. And now it acknowledged it’s plugged in and the red battery symbol disappeared from the app. The power cord was not loose at all so we have no idea what cause this.
•2
05-04-2020 02:31:47
•
HWell, with today's Ring app update my WIRED Stick-Up camera is once again CRITICALLY LOW BATTERY. Come on, Ring! You fixed this issue last month and now it's back. Don't you have source code control to prevent such backleveling of your code? You re-introduced a bug which you previously fixed.
•3
24-04-2020 01:20:43
KI am also experiencing multiple issues with my 3 stick up cameras. 2 are wired and saying batery is critically low. None of them working or updating in live mode. All 3 are having intermittent issues with detecting motion. One wired cam has a warning about replacing my doorbell transformer?! No issues with my flood light cam or ring doorbell. I have had all 5 since December with no issues until recent updates. These issues need fixed immediately.
•2
24-04-2020 02:21:12
BI am having the same issue with my stickup wired cam as well. I read through each post and wanted to add in my issue, I am hoping that if a lot of people add to this thread they will see it. Thanks for everyones feed back!
•3
24-04-2020 03:41:51
PSame!!! Thisi s ridic I tried everything, resetting the device, uninstalling.. Nothing, new ring stickup camera plugged in with the low battery symbol and decreased functionality..
•3
24-04-2020 06:55:44
MSorry to hear about this experience neighbors! Rest assured, if you have a wired or plug in Ring Camera, this message does not pertain to your device and should not change any functionality. I appreciate all of your feedback on this and have shared it with our teams here for further investigation.
•1
24-04-2020 11:05:29
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Troy1
I have the exact same problem now, work great for 2 months now I have the same notice and my camera is wired also no battery. Did you ever get it figured out?
8
31-03-2020 10:40:40
•