Floodlight Cam Wired Plus has one light ALWAYS on dimmed
If i turn the lights ON from the Android App only one of the two spot lights comes on, when i turn it OFF the one light that was on dims but NEVER goes off. Day or night this started last night. Motion detection is on, but we have kept the floods off in the App and get low light /infrared recording only. In Device Settings -> Light Settings: Motion-Activated lights = Off Light Brightness is set mid way ... changing this has no effect on the dim/off mode but does affect the normal lights on mode for the one operational light. No Light Schedules are set. From device heath it shows the device is online, Video is recording and live view works as expected. Reboot works and reports "Reboot Successful!", tried this several times. This Cam is hard wired into a pre-existing flood light receptacle and has been working fine since May purchase. I can turn the power off to the Cam and it comes back online quickly but with the same one light on dim. Just to add one more bit -- Even with 'Motion Detection' (and recording) Off the one light stays on. Amazon calls this device - Ring Floodlight Cam Wired Plus with motion-activated 1080p HD video, White (2021 release) - the web monitor page shows it as 'Floodlight Cam Wired Plus (V3)'
3747 •
2 •
1 •
04-10-2022 05:38:03
Responses (3)
- M
Just to add one more bit -- Even with 'Motion Detection' (and recording) Off the one light stays on. Amazon calls this device - Ring Floodlight Cam Wired Plus with motion-activated 1080p HD video, White (2021 release) - the web monitor page shows it as 'Floodlight Cam Wired Plus (V3)'
•0
04-10-2022 05:46:29
•
- T
Hi @mikeskees. Since the troubleshooting steps have not seemed to correct this issue, I suggest reaching out to our support team. You should not have one light that stays on, even after a reboot and power cycle. Please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
•0
06-10-2022 06:57:32
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
mikeskees
Just to add one more bit -- Even with 'Motion Detection' (and recording) Off the one light stays on. Amazon calls this device - Ring Floodlight Cam Wired Plus with motion-activated 1080p HD video, White (2021 release) - the web monitor page shows it as 'Floodlight Cam Wired Plus (V3)'
0
04-10-2022 05:46:29
•