Ring Alarm

Browse posts, comment, and join in the discussion about Ring Alarm and Ring Alarm Pro.
J
Ring Siren doesn't recognise it is hardwired
installation
alarm
troubleshooting
Had an electrician install the Ring Outdoor Siren, with batteries and hardwired, however the app doesn't recognise that it is hardwired. Have checked that the wires are in the right way. Have not used a Ring Plug-In Adapter (2nd Generation) but a generic adapter that does the same thing. We checked that the voltage/polarity is ok. All help gratefully appreciated. Thanks

83

0

0

27-11-2023 09:13:20

Responses (1)

C
Hi @jds6. If you have your Outdoor Siren hardwired to existing wiring on the home, it needs to be installed according to the instructions [here](https://support.ring.com/hc/en-gb/articles/360050832752-Outdoor-Siren-hardwiring-instructions). Regarding the adapter, we cannot guarantee a third-party adapter will work properly. The Outdoor Siren’s hardwire terminal block supports the Ring Plug-In Adapter (2nd Generation).

0

29-11-2023 09:00:52

Didn't find an answer ?

Log in or create your Ring account to post a question and join in the on the conversation.

Most Helpful Members

W

windracer

1

User
Solution

J

Jventerprises

1

User
Solution

R

Rick_Madik

1

User
Solution

U

user63814

1

User
Solution