Ring Alarm
Ring Alarm for a Church
Our church is going through a remodel currently and is looking at adding fire alarm and security to the building. I was looking at the Ring alarm system with the First Alert smoke/CO detectors. The building is about 15,000 square feet with 3 floors in some areas. I have the equipment list below for what we would use. Any advice on the system and if it would work in this application? Are there any device limits on a base station? 1x - Base Station 3x - Keypads 4x - Panic Button 8x- Door Sensor 10x - Motion Sensor 8x - Range Extender 5x - Dome Siren 45x - First Alert Smoke Detector
2635 •
0 •
2 •
29-01-2020 02:15:45
Responses (1)
- M
Thanks for the response. Do you know if the First Alert smoke/CO detectors act as a z-wave repeater? I know some z-wave devices have the mesh style repeaters in them.
•0
29-01-2020 06:58:25
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Marley_Ring
Glad you asked @mjonesjr84! That is quite an area to cover, but seeing numerous Range Extenders in your list is a great sign that you are well prepared. The Alarm Base Station utilizes z-wave to communicate to the other Alarm devices, which has a range of about 250 feet on an unobstructed path. The Range Extenders will likely be of most use when extending the signal from floor to floor. As far as the amount of Alarm devices that are supported, Up to 100 Z-Wave devices can be used per each security kit. Check out our [help center article about z-wave](https://support.ring.com/hc/en-us/articles/360001263166-Understanding-Z-Wave-and-Mesh-Networks) and optimizing connection for more tips. I hope this helps! :)
1
29-01-2020 06:48:12
•