Responses (4)

T
tim137
Yes - it would be nice to be able to see the mode at a glance from far away if the keypad is plugged in.
0
•
28-02-2021 05:09:35
•
Reply
R
ringadingdong9
I completely agree here and this is ridiculous. Not being able to see the status of the system from across the room! The motion sensor only works at around 3 ft from the keypad as well. Firmware update or 2nd gen recall is needed please?
0
•
01-09-2022 03:11:02
•
Reply
C
Caitlyn_Ring
Hi neighbors. The status lights function differently depending on if you have a 1st generation Keypad or a 2nd generation Keypad. I've addressed this concern before in the following thread, where the behavior for each Keypad is detailed based on the Power Save Mode. I hope this helps clear things up. https://community.ring.com/t/armed-status-lights/153737/3
0
•
02-09-2022 20:08:12
•
Reply
C
Caitlyn_Ring
Hey neighbors, with a recent update you can now choose between the following 3 modes for the Ring Alarm Keypad (2nd Generation):* **Keep Mode Button Lit.** LED lights will stay on at all times (when plugged into a working power source).* **Motion Turns on Lights.** LEDs light up when sensing motion.* **Button Press Turns on Lights.** LEDs light up only when you press a button on your Keypad (preserves battery power).To choose Keypad modes, open your Ring app, navigate to your Keypad device on the main menu, then go to the **LED Settings** tile. You can learn more in [this](https://support.ring.com/hc/en-us/articles/360042894911-Ring-Alarm-Keypad-2nd-Gen-Lights-and-Buttons-Explained) Help Center article. :slight_smile:
0
•
08-11-2022 17:14:18
•
Reply