My Wife is PO’d!!! Just installed 2 Floodlight Cams and she can’t go to the wall switch and turn on the floods! Cycling the power does activate the lights, but only for 30 seconds. What is needed is a software / firmware update that gives the user full control of the lights after a power on event. If the user could select the light-on time during power on or a quick on/off of the wall switch, then wall switch functionality would be restored. As to the time, the selections should be expanded vs the motion setting to also include “continuos” and “until dawn”. Keep the default at the existing 30s, but give the user the ability to set it to a custom setting.