Charging Station: Crashing?
Recently received a [Charging Station](https://www.amazon.co.uk/ring-intercom/dp/B0B5FX7QHX) with the Ring Intercom. I've left it powered on, without batteries inside. However each time I have gone to install a battery in the Charging Station, it is unresponsive and showing 2 solid white lights (1 light for each battery slot - see below, always the same "stuck on" lights each time). Inserting a battery does absolutely nothing - the battery does not start charging, the lights do not change. It's as though the Charging Station has "locked up", and only after power cycling the Charging Station will it recognise that a battery has been inserted, and begin charging. But of course, sometime after I remove the battery it will "lock up" again (last time I charged was on Friday afternoon, it's now the following Monday evening, so it has locked up sometime in the previous 2-3 days). If you're not paying attention, you may insert an empty battery only to come back hours/days later to find that the empty battery has not charged at all. It's not a physical problem with the pogo pins detecting or making contact with the battery - if I cycle the power to the USB PSU while it is plugged into the wall (without touching/moving the USB cable, the installed battery or the Charging Station unit) the Charging Station will work as expected and begin to charge the installed battery. Is this normal (I can't possibly imagine it is), or is this Charging Station defective? 
1289 •
0 •
3 •
31-10-2022 05:21:07
Responses (8)
- NU
I will try a different socket (I'm in the UK) although I'm not hopeful that will make any difference as power shouldn't be the issue. Will try though, thanks.
•0
01-11-2022 04:16:45
NUI moved it to a different socket - it still locks up, in less than 24 hours (one battery slot) and less than 36 hours for both battery slots. Here's a timeline of my testing (note that times are approximate when "lock up" LEDs illuminated, as I wasn't monitoring it that regularly!). Also apologies for the lighting, my room isn't really nicotine yellow... I blame my Android camera! 1. 18:32:34 on 01 Nov - Freshly powered up in a different mains socket. Charging a battery in the bottom slot (bottom LED is flashing):  2. 18:54:11 on 01 Nov - Charging complete in bottom slot, all 4 lights solid:  3. 18:54:39 on 01 Nov - Battery removed, lights out:  4. 17:48:54 on 02 Nov - LED on empty top slot has now become lit, and this slot won't begin a charge when a battery is inserted. The bottom slot is empty in the photo (the battery is not slid fully home) - I did temporarily push home the battery and it began charging in the bottom slot (I then removed it again):  5. 00:02:01 on 03 Nov - LED on empty bottom slot is now lit (again, battery is not fully inserted):  6. 00:02:11 on 03 Nov - Battery is now fully inserted in the bottom slot, but it does not charge, and the LEDs do not change (they remain permanently "locked up" until power cycle):  So it took less than 24 hours for one battery slot to "lock up", and then less than another 8 hours for the second battery slot to "lock up". I will contact support for a replacement, but this seems to be a recurring issue - it has been reported [here on the forum](https://community.ring.com/t/charging-station/122195/6?u=neilm-uk) (OP took a refund) and also on a review on the [UK Amazon product page](https://www.amazon.co.uk/gp/customer-reviews/R16PTVJR7NN08M/ref=cm_cr_srp_d_rvw_ttl?ie=UTF8&ASIN=B08CK4PXN5) - both original and replacement failed identically. In all images discussing this issue, they fail in the same way with the same static "stuck on" LED(s) as mine:  It's a little worrying that replacements have the same issue - this suggests either a design or manufacturing/QA issue. :man_shrugging:
•0
03-11-2022 12:35:18
- NU
Quick update: I used Chat initially, but discovered it isn't very useful as they can't diagnose technical issues so I had to call UK support. I spoke with a lovely guy (Jimmy) who was very polite and helpful, and the Charging Station is going to be replaced (send me a new one, obviously no point sending the defective one back) - it might take a few days, but to be honest there's no rush. Let's hope the replacement doesn't have the same fault. :crossed_fingers:
•1
03-11-2022 05:10:33
•
- NU
I've now received an email from Ring, saying they will be refunding the Charging Station and they want the Charging Station returned. Ho hum. It makes me wonder why they're not willing to replace it as we agreed on the phone call - maybe they're all defective? There's hundreds of 1-star/2-star reviews for the Charging Station on amazon.com (US-site) which isn't a great sign for such a simple, basic device - many of the negative reviews state that the Charging Station stops working. I could buy another once it's been refunded, but this uncertainty over the quality of the genuine Ring charging device makes me wary - maybe a third party charger will be a better option.
•0
05-11-2022 04:08:29
•
THi @neilm-uk. I'm not sure why our support team has chosen this replacement process, but I'm glad that they have your satisfaction in mind.
•0
07-11-2022 05:19:19
NUYeah, I don't understand either! This is the email explaining the refund - it says I should receive an email with the return label in 24/48 hours but it's been 72 hours already and no sign of the return label (I've checked spam folders etc.) so I don't know if this is a case of the left hand and right hand not knowing what is going on, and that a replacement is still in progress.  I must say the wording in the above email is just weird, with the first letter of literally every word capitalised, and somewhat stilted English. Perhaps it's been hand-written by a non-native English speaker/writer, but normally these sorts of things would be automated in which case this isn't what I'd expect from a professional organisation. I checked where it came from, and it doesn't appear to be a scam... :smile: Anyway, I was told the replacement may take a week or 2 to arrive, which is fair enough, so if neither the replacement or return label has arrived in another 10 days from now then I'll follow it up...
•0
08-11-2022 09:56:15
- NU
Two more emails today! The first email confirmed that a shipping request had been created, and a replacement is on the way. :+1: The second email (it arrived shortly after the first) was a continuation of the "returns label" email (see previous post) and confirmed that instead of a return/refund, a replacement is now being issued. I don't know if anyone from this forum reached out on my behalf but if you did, many thanks! :+1: :smiley:
•0
09-11-2022 07:43:22
•
THi @neilm-uk. Good to hear. Sometimes the shipping process can be different based on what region you are in.
•0
10-11-2022 05:33:01
NUA new charging station arrived today, standard retail package so I've got a spare PSU. :smile: I've plugged it in, but without a battery inserted as that seems to be the trigger that causes the Charger to lockup/crash - I should know in about 24 hours if it's better than the original. :crossed_fingers:
•1
11-11-2022 06:16:40
- NU
Pleased to announce that the replacement Charging Station is behaving itself and not crashing, so that's good news - it has what might be a date of 2022/06 printed on the bottom, while the same code on the first is 2022/04 so maybe there was a run of duff units from the factory for a short period... Anyway based on my observed charge level there really isn't any need to have a charging station if your own a Ring Intercom! My [charge level](https://community.ring.com/t/ring-intercom-is-trickle-charge-from-the-intercom-system-supported/167311) has been 89%/88% for the last 2 weeks... which is either weird (or a bug), or an incredibly frugal hardware design by Ring. :thinking:
•1
14-11-2022 02:13:07
•
CHey @neilm-uk, I'm happy to hear your replacement Charging Station appears to be working without any issue. :)
•0
14-11-2022 09:23:11
NUJust to report that after a week the replacement has now started showing the same "lock up" problem as the original. 😞 I'm sure Ring sells a lot of these and is aware of the failures, but this seems to be a way too common issue for such a simple device. I'm not going to waste any more of my time on this, or that of Ring customer service - it is what it is (ie. garbage), but Ring may want to investigate as this ultra simple device has just one function which it is unable to perform reliably. 🤷♂️ Probably best to avoid these Ring Charging Stations, or source a more reliable third-party alternative. I'm just going to bin both of mine - in future I'll use the USB cable to recharge (hopefully only once or twice a year with a Ring Intercom).
•0
22-11-2022 07:46:10
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Tom_Ring
Hi @neilm-uk. This certainly doesn't sound normal. I would try a few different outlets to see if that will change how to Charging Station behaves. If there is no change, I suggest reaching out to our support team. Please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
0
01-11-2022 03:19:37
•