‎Will the retro-fit kit work with my current configuration (picture included)

English

Help

Community Home

Ring Alarm

Browse posts, comment, and join in the discussion about Ring Alarm and Ring Alarm Pro.

B

BMeadBam

Will the retro-fit kit work with my current configuration (picture included)

retrofit-kit

cs-support

Above is picture of my current set-up. Is this something I can do myself or should I get a pro to install? I currently have 22 sensors from prior alarm (19 windows/3 doors). Thank you! ![alarm.panel.3|375x500](upload://83DR7CcFkOcrGUi7uCbBcfrOCrA.jpeg)

1430 •

0 •

06-01-2022 01:07:54

Responses (2)

C
Caitlyn_Ring
Hi @BMeadBam. You can find installation instructions for the Ring Retrofit Alarm Kit in our Help Center Article [here](https://support.ring.com/hc/en-us/articles/360036012151-Ring-Retrofit-Alarm-Kit-Installation-Instructions). Please note that this is an advanced DIY project and we recommend that you consult a professional before installing the Retrofit Alarm Kit. You can also find information on compatible wired alarm zones [here](https://support.ring.com/hc/en-us/articles/360036065091-Which-wired-alarm-zones-are-compatible-with-the-Retrofit-Alarm-Kit-). If you have any more detailed questions, you can reach out to our support team at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support. :)
0
•
06-01-2022 07:44:55
•
B
BMeadBam
Thanks Caitlyn....i may take a crack at it before i call an installer....alot of vids show it can be done without too much trouble.
0
•
09-01-2022 12:52:24
•