Ring Accessories
Responses (11)
- C
Hey @Naima63. Were you able to get the device set up? If you are still unable to set up the Chime, please let me know where you are getting stuck at so I can look into this further! In addition, if you need immediate support, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). We're taking additional steps to protect our team and help reduce the spread of COVID-19. This has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support.
•0
20-05-2020 11:00:13
•
JI have the same problem. Tried 2 ring chime 2nd gen. Get to connect to wifi and green light keeps flashing and the message connect to ring network without internet. Got a ring chime pro yesterday and I have the same trouble
•0
22-05-2020 01:33:42
MSorry to hear about this experience, neighbors! If your Chime is still not setting up as intended, please try removing and reinstalling the Ring app on your mobile device. I recommend also attempting setup in different outlets in your home, as well as close to your wifi router, if you have not already. There are also two methods for setup which are scanning, or setting up without scanning, try both. If setup is still not completing as intended, the best next step will be to reset your Chime by holding the setup button for 20 seconds. Feel free to let us know how this goes!
•0
22-05-2020 07:42:05
BSame issue here, worst client support on the planet. they can't solve anything other than to suggest buy a new one and install all over again. Nest here we come.
•0
22-05-2020 08:16:30
BTry this. When it asks for your wifi and shows up automatically...DO NOT continue. Select "no" and it will allow you to choose your wifi and manually put in the password. I believe the issue here is the password. I had the same issues you all have until I manually put in my wifi password rather letting the app try to access it. Let me know if that works!
•4
23-10-2020 08:11:42
HI have a similar issue. I hold the reset button for 5 or 10 or 30 seconds. The light will flash quickly for a few seconds, then go back to solid blue. I can’t get it into setup mode
•0
26-10-2020 03:20:54
- S
Hello, I'm trying to setup my 2nd Gen Chime and I get to the setup wifi part, the chime flashes blue then goes to solid red. I've tried moving it closer to an access point but that doesn't seem to do it. Any suggestions? Thanks.
•0
21-05-2020 10:19:31
•
- B
Don't call client support, they are worthless. Their suggestion to me was to buy a new one and try again.
•0
22-05-2020 08:18:27
•
FJust bought a Chime Pro 2nd Gen. Right out of the box, it will not complete the setup, fails to connect to the internet at the end of the wifi setup. Have tried like 10 times now, rebooted wifi, hard reset the Chime, updated the Ring App, scanned the code, used the 5 digit code, yada yada. Nothing works. I was going to call Ring but sounds like that'll be a waste of time. Anybody got this to work yet? Thanks.
•0
09-06-2020 09:19:50
FJust a final follow-up here...I gave up and returned the Chime Pro Gen 2. I ordered a Gen 1 model, took it out of the box and within 5 minutes it was setup and working perfectly. There must be something wrong with the Gen 2 models. Thanks for everyone's responses.
•0
29-06-2020 06:01:32
EYes I’ve tried connecting to the ‘setup 5b’ network and followed all the troubleshooting. It still will not connect and set up my 2nd Gen Chime ??
•0
15-11-2020 11:17:40
MHi @Edden. When the setup is failing at pairing the Ring app with the Chime setup access point as you've described, this can often be resolved by removing and reinstalling the Ring app. Trying to complete the setup on another mobile device entirely, if possible, can also resolve this concern. If the setup still will not succeed at the connecting to the Chime setup network step, try resetting the Chime by holding the setup button for 20 seconds. I hope this helps! :)
•0
17-11-2020 04:35:22
- W
The saga continues! [This is my experience](https://community.ring.com/t5/Accessories/New-Chime-Pro-2nd-Gen-Won-t-Connect-To-Network/m-p/40247#M1467).
•0
09-06-2020 09:51:13
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
borse2008
So just trying to troubleshoot why this ring chime pro will not connect correctly, just come off the phone from support in the USA, even they are confused. So tried adding it normally with the QR code or the 5 digit number and takes me through the process then has trouble connecting to the wifi supposedly even though its registered on my router with an ip address. It then tells me and flashes red saying connected to wifi but no internet. Tried reinstalling the app on two devices and two app stores. Same problem anyone else know a fix?
0
18-05-2020 08:42:42
•