Ring Intercom: View wiring setup WITHOUT adding a new device

In my building we have a mixture of handsets for a 4-wire Came BPT System 200. Some older handsets have the terminals numbered 1/2/3/4 while more recent handsets are numbered 5/7/8/9. For reference I've setup my Ring Intercom successfully on a recent AGT A200 handset with 5/7/8/9 terminals: * **A1 -> 5** Common/Ground * **A6 -> 7** Call * **A2 -> 8** Speech In (Speaker) * **A3 -> 9** Speech Out / Lock and everything is working as expected (received audio from the entry panel is rather low in quality, but hopefully audio codec improvements will come in time). However, to assist other neighbours with different/older handsets I'd like to repeat the wiring setup in the app to better understand THEIR handset wiring, perhaps to produce a simplified installation guide, or to assist them remotely. For reference, on an older System 200 handset with 1/2/3/4 terminals the wiring would be: * **A1 -> 1** Common/Ground * **A3 -> 2** Speech Out / Lock * **A2 -> 3** Speech In (Speaker) * **A6 -> 4** Call Seemingly it's not possible to re-run the wiring setup in the Ring app without installing a complete new Ring Intercom device, which is obviously a pain for anyone that just wants to understand the wiring of a prospective installation. Ideally the wiring setup instructions would be made available on-line to view at any time - this would help with anyone offering installation as a service (for those less able). Making the wiring setup instructions available free to access online would likely also help with pre-sales, too.