Smart Lighting
Lights only working manually
I have a Ring floodlight with 2 batteries installed and attached to a Ring solar panel I have the app set to detect motion. Everything appears to work BUT motion at night will not trigger the lights to come on. I don't have any schedules setup. I can go to the app and turn on the lights manually and they will go off after 1 minute as set in the app. The setup and lights worked well just as I have described for a year or more with motion detection and no schedule. I don't want the lights on all night but I do want them to go on when they detect motion at night. Any ideas as to what is wrong?
756 •
0 •
0 •
04-10-2021 02:52:27
Responses (2)
- M
Hey @jokharr! This should be working as intended with your described setup. I recommend adjusting your Smart Lighting threshold in the Ring app. To do this, Visit your Smart Lighting device, tap on Light Settings, and then select Light Sensor to adjust the threshold. Try also, assigning this Light to another group as a test to see how it behaves. As mentioned in our [Smart Lighting troubleshooting article](https://support.ring.com/hc/en-us/articles/360025667012-Troubleshooting-Guide-for-Ring-Smart-Lights-Floodlight-Battery); * Check your batteries. They may be defective or incorrectly placed. * Take yourself out of the equation. Leave the area for 10 minutes to give the lights time to reset without you triggering them and then return and check the lights. * Make sure you're testing the lights in darkness. If this concern persists despite trying all of the above, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support. Feel free to let us know how this goes! :)
•0
19-10-2021 04:37:57
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Tom_Ring
Hi @jokharr. Is there any other ambient light in the vicinity? If there is, it may be preventing the Light Sensor from detecting that it is dark outside, ultimately causing your lights to not turn on. You can also try adjusting the sensitivity for this light in the Ring app as well as toggling off/on the Motion Detection. Let me know if this helps!
0
05-10-2021 04:22:36
•