Responses (4)

E

Eagle328

Yes there is. In devices, under your light group. Then click settings for that group and you can change how long they stay on for. Remember the longer they're on, the more battery they will use.

0

•

11-01-2020 16:03:30

•

Reply

M

markomara

Thanks for your reply Eagle328 however there doesnt seem to be that option. I have only one cam spotlight. I created a group following your suggestion for the one camera howver there is no settings for groups to be adjusted. There just does not seem to be any lighting adjustment option in the app

1

•

11-01-2020 16:13:25

E

Eagle328

Oh, I saw the post was in smart lights so I thought you had one of those. Sorry. You should be able to find it in devices, your spotlight, device settings, light settings and finally light schedule. It's on the bottom of that page. Hopefully I'm right now. LoL

0

•

11-01-2020 16:29:40

M

madman

I'm having trouble with my floodlight cams. I programmed them to have the floodlights come on at 6:00 PM and off at 6:00 AM. But in the middle of the night the lights are off. I checked the schedule I configured and it says on at 6 PM off at 6AM. What am I missing ? By the way, these are wired

0

•

14-01-2020 23:20:48

C

CrazyCat

Use GMT time. It doesn't use your local time zone.

0

•

15-01-2020 05:47:06

M

madman

I want the lights to come on at 6:00 PM EST and off at 6:00 AM EST. What time do I set on my iPhone ?

0

•

15-01-2020 19:14:06

D
dluchs154
I was trying the same thing, only trying to shorten my time as it was too long. After much searching, I finally found out where it is. After you choose your Device and go into Device Settings, click on Light Settings, then surprisingly, Motion Zones for Lights. There you should be able to set the light pattern you want, and at the bottom of the page is : After motion, keep the lights on for: with a list of times from 30 seconds to 15 minutes. Good luck.
1
•
29-05-2022 01:47:24
•
Reply
M
MarianneAcker
Gotta love the WONDERFUL (cough cough) support we get from Ring. I got off chat where I was told that the only setting is 30 seconds and there is no way to change it. When I asked what i was supposed to do if someone was prowling my backyard, I was sure they would be there for more than 30 seconds. I was told after 30 seconds if they were still moving the light would go on again. I knew this did not sound right, and I ended up finding the answer here.
0
•
28-08-2022 16:55:23
•
Reply
M
MDWoodland
It appears there is no way to increase the length of time the lights stay on after detecting motion. The advice in this thread is incorrect for the Spotlight Cam.
0
•
02-02-2025 23:35:40
•
Reply