Ring Doorbell Wired UK
I have purchased a Ring Doorbell Wired. I currently have a transformer in my consumer unit from my existing push button doorbell. It is rated 4-8-12V. I'm not sure what the output voltage is, but hopefully 8V. In the hallway, I also have a small round mechinical chime. I opened up this mechanical chime and it there are two wires. It is just the case of bypassing this doorbell by putting a jumper cable between the two? Attached pictures. 
1265 •
0 •
2 •
25-06-2021 12:59:07
Responses (2)
- T
Hi @kevinnguyen. @bemak187 is correct here. If you look closely, you can see the circled numbers 1-2-3-7-8. Depending on the combination on wired inputs, this will determine the voltage. Example- Using hole #1 and #3, will give you 12V, whereas #1 and #2 will give you 4V. I hope this makes sense.
•0
28-06-2021 03:55:21
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
bemak187
@kevinnguyen The voltage coming from the transformer will depend on how its wired. That transformer can do 4, 8 or 12 depending on how its wired. There are different holes for the wires to get different voltages. Without removing it and looking you don't know really. Only mess about with it if you know what you are doing. Otherwise get an electrician in. Literally 30 mins work for them.
2
25-06-2021 01:31:53
•