Any recommendations on how you can get replacement stakes for the Smart Lighting Pathlights?

Hi @ocmikey. Please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support. Once connected with one of our agents, they will be able to get you replacement stakes for your Pathlights, as these are not available on Ring.com. Feel free to let us know how your call experience was!

Unfortunately replacement spikes are not available from Ring or from anyone else. Sadly, this renders a fully functioning pathlight useless. I was in the process of expanding my number of Ring home security products because I love how they work and how easy they are to set up. But the absence of simple spare parts should give anyone pause about the prudence of doing so.

‎Doorbell with battery has no power

English (UK)

Help

Community Home

Ring Video Doorbells

Browse posts, comment, and join in the discussion about Rings wired and battery doorbell.

A

Adarham

Doorbell with battery has no power

hardwired-battery-video-doorbell

Hi, my battery was showing 30% and then wouldn't connect to wifi. So I charged it up but my doorbell won't work. I've tried a additional battery from a relative and it still won't work. I has no power and I'm thinking it's broken. Also I can no longer talk to support. Help??

906 •

0 •

17-12-2020 08:24:34

Responses (2)

T
Tom_Ring
Hi @Adarham. First, try rebooting your internet router. This will help clear up any congestion in your internet. Next, you can reset your Doorbell and reconnect it to your wifi. You can reset the Doorbell by pressing and holding the setup button for 20 seconds, then release. After about 1 minute, you can [reconnect](https://support.ring.com/hc/en-us/articles/360034825092-How-to-Reconnect-Your-Ring-Device-to-Wifi-or-Change-Your-Wifi-Network) the Doorbell to your wifi. If this doesn't work, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support. We're taking additional steps to protect our team and help reduce the spread of COVID-19. This has resulted in longer than normal wait times.
0
•
18-12-2020 05:20:51
•
V
Valentee
It's usually an easy fix. Unscrew the **doorbell** button and touch together the two wires fastened to the back; if the contact between the wires makes the bell ring, then the button is broken and should be replaced. Connect up the replacement button the same way the original button was wired[.](https://www.myprepaidcenter.us/)
0
•
21-12-2020 03:07:38
•