Responses (1)

• T

  Tom_Ring

  Hi @Raneel. Typically, the battery level will not update until the Doorbell button is pushed, or a motion event is detected. When this happens, the Doorbell communicates with the server and the proper battery percentage is displayed.

  1

  •

  04-04-2022 10:53:37

  •

  Reply

  I0

  IREP-09

  I have had this same issue. Battery is fully charged, but when reinstalled, it is still showing low battery charge. I tried the suggestion of ringing the doorbell to reset and it didn't work. Doorbell was just purchased in April. One would expect the battery life to last longer than a month and a half.

  0

  •

  24-05-2022 10:44:11

  C

  Caitlyn_Ring

  Hi @IREP-09. It sounds like there could be an issue with the battery. Ensure that when you're charging the battery, you're using the provided charging cable plugged into a standard power outlet. Charge the battery for about 8 hours before inserting it back into your Doorbell. Then reset the Doorbell by holding down the setup button for at least 20 seconds. After the reset is done, set the Doorbell back up in the Ring app using the steps under Set Up a Device. Test out a Live View or ring the Doorbell and check the battery percentage after to see if it's reporting correctly. If the battery is still showing a low charge, you may need to replace the battery. For that, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406) so they can further assist. If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.

  0

  •

  25-05-2022 08:01:53