Blinking blue light, top half only
I had an electrician install the Ring Doorbell Pro. It worked for about a month with decreasing effectiveness. Then it started blinking a blue light, top half only. I just had an electrician replace the transformer with a Ring branded one. The Pro Power kit is hooked up to the chime. The house is only 11 years old. The light is still blinking blue, top half only. Any attempts to reset it will show a white light for about 15 seconds, then revert to the blue blinking light. It doesn't appear to be charging whatsoever. Is something wrong with it? Do I have a defective unit? Not sure what else to do at this point.
2963 •
0 •
5 •
17-11-2020 11:34:56
Responses (6)
- V
Hi, Thanks for the reply. Unfortunately the light is not flashing upwards or circling or rotating - it's just a solid blue blinking on the upper half of the circle, which hasn't changed at all, even after resets. I think the internal battery must have died, despite it being used less than a month. I will contact customer support.
•2
18-11-2020 09:17:46
- H
Yup...Same issue! This is ridiculous. It worked for less than a day. Now it just blinks blue on the top. Did the bypass mode, new transform, tried resetting it up MANY times. IT WON'T WORK. It's so frustrating that it's this hard.
•2
18-12-2020 09:31:17
•
PTWO YEARS And NO response! Time to dump all and go simplIsafe. Unbelievable.
•1
29-07-2023 01:30:59
- C
Hi neighbors, you can find information on the different light patterns for the Video Doorbell Pro [here](https://support.ring.com/hc/en-us/articles/360051777531-Ring-Video-Doorbell-Pro-Flashing-Light-Patterns). If the top half of the circle is blinking blue, it's likely due to insufficient power. I'd recommend reviewing the [Hardwiring Checklist](https://community.ring.com/t/hardwiring-checklist-video-doorbell-pro/37520) for the Doorbell Pro to make sure it's receiving enough power. For further assistance, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406#callus). If you are outside of the US, please visit [here ](https://support.ring.com/hc/en-gb/articles/213608406)to see how to contact support.
•0
31-07-2023 07:10:48
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
Most Helpful Members
View All
©2024 Ring LLC or its affiliates
Marley_Ring
Hey there, @VW650! A blue light flashing upwards around your Doorbell button should only happen during setup. This is an indicator that your Video Doorbell Pro is connecting to your wifi network. A light indicator on your Video Doorbell Pro is a great sign that power is sufficient. If a reset did not resolve this, and the Doorbell wont connect in the Ring app, please give our support team a call at one of the numbers available [here](https://support.ring.com/hc/en-us/articles/213608406). We’re taking additional steps to protect our team and help reduce the spread of COVID-19, so this has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 [here](https://support.ring.com/hc/en-gb/articles/360041597471) to see how to contact support.
0
18-11-2020 07:17:49
•