Responses (7)

• W

  Wizross

  Mine has been working fine previously, but in the last couple of weeks just displays "not connected" all the time. I didn't have an issue when it was reading "Not established", because sunlight had been limited, so wasn't charging and battery depleting, but now it's always not connected. Have taken it off and resecured the connections, but still the same. Seems to be an issue for many having googled it.

  0

  •

  03-12-2020 02:18:42

  •

  Reply

  T

  Tom_Ring

  Hi neighbours. I can offer a suggestion you may not have tried. With your Solar Panel securely connected, reset you camera. You can do this by pressing and holding the setup button for 20 seconds, then release. You camera will take around 1 minute to reboot, then you can [reconnect](https://support.ring.com/hc/en-us/articles/360034825092-How-to-Reconnect-Your-Ring-Device-to-Wifi-or-Change-Your-Wifi-Network) it to wifi. Your camera will perform an update and over the course of the next few days, you should see your connection change to display the proper status. I hope this helps!

  0

  •

  04-12-2020 03:55:33

  T

  TOMD1

  Only one of my three Spotlight cams works with the solar panel. they all constantly say not connected and then one of them the battery is at 100% so I know it’s working but the other two the batteries just keep draining down to zero even though the solar panel is connected. I’ve gone through all the suggestions and I’ve received from Ring support and nothing works. This is clearly a flawed product or flawed software that can’t recognize what the status is correctly.

  0

  •

  12-01-2022 05:42:23

• W

  williams1276

  Where is the reset button and when you do this will you have to set up this camera again then ? I have had the same problem since the outage. My solar panel won’t charge and when it does it barely charges. Only had charger for less then 6 months. Most time it keeps telling me no solar charger connected

  2

  •

  25-12-2020 12:09:03

  •

  Reply

  M

  Marley_Ring

  Hi there, @williams1276. The reset button for your Ring device is the same as the setup button. Holding the setup button for 20 seconds will result in a reset. As we enter the season for cold and overcast weather, please keep in mind that several hours of sunlight per day is crucial for the Solar Charger to provide a proper connection. I hope this helps! :)

  1

  •

  29-12-2020 03:46:01

• S2

  Scooter-2021

  I have been struggling with the same issue for several days. I removed the battery , made certain it was at 100% charge, then went back through the setup procedures. Same result, not showing the the solar panel connection? Unit has been back in place for over 24 hours with no change? Camera is working, solar panel NO WAY! I'm on the verge of just boxing everything up & returning it! From the posts I've read this seems to be a common issue. WHY! Shouldn't this be a more user friendly process or am I missing something??

  1

  •

  10-01-2021 05:21:50

  •

  Reply
• W

  Wizross

  Still having the same issue. Bought it in August. Worked for the first month or so and since then, Not Connected for months, which is different to what I saw displayed when there was just not enough sunlight. Have reset the camera, removed and reattached the connections. Nothing resolves it. Come on, Ring! Acknowledge this as an issue as it's affecting many people.

  0

  •

  11-01-2021 03:43:08

  •

  Reply
• U

  user32503

  Spotlight cam Solar panels NOT charging. Im am beyond frustrated with this . Wish i had never pur hased this low quality product! I see everyone else has the same problem. I also see there seems to be no fix for it . Also,my motions work half the time,half the time they do not. I think i will eat this loss,cancel my monthly whatevet it is im paying for and have my house wired with cameras by a profesdional company!

  0

  •

  07-01-2023 01:32:34

  •

  Reply