Responses (4)

F
FlapjackUK
It goes through the whole set up all over again. Everything is working so I don't get it. Should I reconnect the siren again maybe?
0
•
14-05-2022 22:58:12
•
Reply
T
Tom_Ring
Hi @FlapjackUK. Have your tested the LED and Siren? If you haven't done this, it could be the reason you are seeing the Finish Setup. Typically, the Finish Setup appears when there is still a step that needs to be completed. If you are going to remove this device and re add it, you will need to be physically by the device and possibly dismount it.
1
•
16-05-2022 18:09:28
•
Reply
J
JohnP79
I have exactly the same bug, and I'm sure I completed all the steps. My phone did go to sleep sometimes during the initial setup, and the guide restarted from the beginning when I woke it, so maybe that has something to do with it. The siren is working fine, so I'm not too bothered.
0
•
29-07-2022 18:58:40
•
Reply
J

JohnP79

Believe it or not, I just managed to fix it. I removed and re-added another device (range extender), and after completing setup for that device, a screen appeared with "devices still requiring setup" - and the siren was there. Running the whole setup procedure one more time for the siren, starting from *that* screen, seems to have done the trick! :slight_smile:

3

•

29-07-2022 19:38:02

•

Reply

F

FlapjackUK

Thank you soooo much!!! This also worked for me, I did exactly what you described & voila! No more "Finish SetUp" in my Alarm Siren page. 🙌🙏💯👌

0

•

29-07-2022 20:20:22

F

FlapjackUK

Thank you soooo much!!! This also worked for me, I did exactly what you described & voila! No more "Finish SetUp" in my Alarm Siren page. 🙌🙏💯👌

0

•

29-07-2022 20:20:22

F

FlapjackUK

Thank you soooo much!!! This also worked for me, I did exactly what you described & voila! No more “Finish SetUp” in my Alarm Siren page. :raised_hands::pray::100:

2

•

29-07-2022 20:21:29