Gates compatible with access controller?
Is there a list of known compatible gate controllers for the access controller pro 2? I have an old liftmaster that the board has failed and am needing to replace the board or change/upgrade the entire system, so it's a good time to integrate it. I could go to myq, but I'd rather simply have a ring controller. The information available on access controller is rather limited.
1864 •
0 •
2 •
02-04-2022 04:27:22
Responses (8)
- M
Thank you for the response, but is there an answer to my question? Does ring have a list of compatible driveway gate openers?
•1
05-04-2022 03:03:51
•
- S
Yes, I have the same question. The current relay for my gate is integrated into the control system I want to replace. Is there a door latch relay or a list of relays that will work? The latch is 24VDC. Thanks
•1
10-05-2022 09:56:10
•
- C
Hi neighbors. We don't have a list of specific models that are compatible. As mentioned, you'll need to have a gate or door with an electrical relay or Wiegand access system. You can view the installer instructions for the Access Controller Pro 2 here, which may help you determine if your relay system will be suitable. If you scroll down on the [product page](https://ring.com/products/access-controller-pro-2), you can also look at the specific power and connectivity information. I hope this information helps! :)
•0
11-05-2022 05:00:56
•
SHi, I currently have my gate access controller hooked up to ring.com so that I can open my gate from anywhere through the camera system as well down there. I also have your alarm monitoring system. Is it possible to set up my alarm monitoring system, where if the alarm gets triggered or the fire department gets triggered or the ambulance gets triggered, I can set it up where the gate automatically opens up and stays open until I close it so that the fire, police or ambulance department does not have to wait there for one minute for the gate to open?
•0
31-07-2023 03:12:00
- S
I think I found a door control board that will work. However, it’s looking for a voltage on the “Open” terminals in order to activate the relay. I’ve determined that the Ring AC 2 connects REL1 to REL2 when it receives the “Open” command. I can run a power supply in series to REL1/REL2, but what are the limits to the voltage/current running through this connection? Thanks!
•0
18-05-2022 12:38:25
•
Didn't find an answer ?
Log in or create your Ring account to post a question and join in the on the conversation.
Community Resources
©2024 Ring LLC or its affiliates
Marley_Ring
The [Ring Access Controller Pro 2](https://ring.com/products/access-controller-pro-2) will likely be a great fit! :) Ring Access Controller Pro 2 is a smart access device that works with an existing electrical access control system that can be triggered via relay to grant access through your security gate with the Ring app. You will need to have a gate or door with an electrical relay or Wiegand access system. Check out our Help Center article below for more details. https://support.ring.com/hc/en-us/articles/360061413971-Ring-Access-Controller-Pro-2-Information
1
04-04-2022 09:04:17
•