Ring Pro cracked button

Do you have the Ring plus plan? If so, it would be covered under warranty.

Wow,

Looks like I am one of the lucky ones with a crappy button. What a freaking joke that they didnā€™t make a button that can last. Will definitely not be buying a Ring device again and will warn others against wasting their mone the same way.

I have the answer to cracked button issue: I called RING and they told me since the door bell is out of warranty, they will give me a 35% discount on a new unit.

Therefore, I can get a new button for $424. :slight_smile:

Such a deal.

Alternative: I desided to hang a note on my RING doorbell unit indicating that this cracked doorbell will not be replaced because RING wanted $424 to send me a new one.

Have a nice day RING.

3 Likes

Bought mine for $129 on sale.

cracked button here too!

fell off after the one year warranty. called support and got offered a discount to buy a new unit or go kick rocks.

HAHAHA

now i have packing tape holding the button to show how great this product is.

seems this is a VERY common issuse/flaw

RING, please man up and address the issue instead of sweeping it under

3 Likes

@CodeMonkey - Thank you for the quick print and ship!

Ordered Thursday, arrived Monday and instralled.

IF only RING was this good.

:laughing:

1 Like

Same here , cracked button, ring please recognize this issue as a problem and provide a replacementā€¦

3 Likes

Button cracked!
Bad product!
Using it for less than 1 year.
This is most important part on it right?
And it splits in half.
Shame on you RING!

3 Likes

Same issue here, looking over the recording it seems that the delivery guys are really trying there best to break the Ring Pro button because they do not want to be recorded. Mine is broken now. @Ring, please make the device tamper-proof, add this as a product feature!!

1 Like

Make sure your 3D printed material is able to withstand solar radiation. I think one of the reasons the button cracked is because the material Ring used is not able to withstand the solar radiation from the sun and the material degrades with exposure to the sun. That and the temperature cycling that the door bell is exposed to (causing expansion and contraction) will cause the molded button to crack along the weld line of the molded button (Most molded parts have weldlines. If you look at a tv remote you can see these near the button openings).

In other words Ringā€™s design of the button is crap. They did not do any temperature cycling with solar radiation for this design other wise they would have found the problem.

1 Like

I agree with you that this is a design flaw. The material they used is not able to withstand UV radiation. Mine cracked after 1 yr and 5 months. UV degrades the plastic if it doesnā€™t have UV stabilizers in it. With temperature cycling, if you have hot summers and cold winters, the button expands and contracts and eventually, with degraded plastic, the button experiences fatigue and cracks along the weldline. Most molded plastics have weldlines. If you look at tv remotes closely you will see weldlines at the button openings. Weldlines are a result of how the plastic flows when it is injected into the molding tool.

If the designers at Ring did a temperature cycling test with solar radiation they would have seen this flaw in their design. This is a design flaw and a result of poor design practices and poor design processes.

1 Like

go on social media and publicize this. My button just cracked after 1.5 years. I also had a previous one that just stopped working also after about 1.5 years.

I get the feeling that Ring doesnā€™t design their products very well. It seems like a lot of people have cracked buttons. Bad design and bad design practices lead to bad product.

1 Like

I agree with you. It seems that there are a lot of people with this issue.

The crack is along the weldline of the part. The weldline is formed during the injection molding process for the part. The material that they chose is also not UV resistant. So with exposure to the sun, this material will drastically degrade. With temperature cycling, hot summers and cold winters, and people using the door bell, the button fatigues. Once fatigued, a crack will start in the button. Some more solar radiation and temperature cycling will propogate this crack.

WIth a proper design and testing and good molding this problem could have been avoided by Ring. Ring should have determined that they had this problem by doing a temperature cycling test with solar radiation exposure. Poor design and design processes.

1 Like

Ultem is a good material to use with FDM. It is UV resistant without the need for stabilizers.

It has good dimensional and strength properties. Only issue is most 3D printers will not be able to handle this material.

2 Likes

Okay, add me to the list. We bought ours in June 2018, and now we have ā€œthe crackā€ 18 months later.
I called Ring and the customer service guy communicated the prepared script which included " Iā€™m very sorry. Youā€™re out of warranty. I can offer you a 35% discount. I wish I could do moreā€¦". My old doorbell lasted 25 years. My samsung 8 cellphone, which gets 10 hours of daily use, is dropped 3 times a week is on year 4 and every feature still works . My ring doorbell, which I can now see, has been pressed just 47 times in 18 months. ā€¦is broken. Seriously, stand up and do the right thing. Either its obviously a known defectā€¦or planned obsolescence? Which is it? It cant be wear and tear.

1 Like

@CodeMonkey, Printing worked like a charm, all credit to you !

#respect and thanks

@RING Thanks for the 30% discount voucher, however it stays a big FAIL and a SHAME for you crapy hardware build devicesā€¦

#shame and blame

Iā€™m so glad to hear that and see another replacement solved. Now to see if it stands the test of time and the elements. Iā€™m sure it will. And if nothing else, itā€™s an inexpensive replacement option. Thanks again and thanks for posting the results!

1 Like

Same for me - replacement on the way at no cost. Thanks !

1 Like

Mine was broken after the first 8 months, got a replacement and now after a year and 3 months itā€™s starting to crack yet again. :cry:

What good is feedback if itā€™s not addressed

2 Likes