That’s awesome to hear. It’s not a difficult process and doesn’t require any specialized tools outside of some narrow shaft fine philips head screwdrivers and some spudgers to keep things separated. The whole process is mostly removing about 3-4 layers of covers and circuit boards carefully from each other and about 9 small screws that have to be removed and replaced. Other than that, just making sure to use care not to break or pull out any of the ribbon cables inside and test the button before re-assembly. If you don’t count the itterations and testing to get to the final design, the whole process took less than an hour to just replace. One additional hour to do the design and itterate, by itself. Very rewarding to contribute to even small needs like this one. Glad I could help.
1 Like