Right now, mine is:
Firmware 1.16.00263
3990 mV
RSSI -53 (5GHz WiFi network)
Using a new16V, 30VA doorbell transformer.
Update:
My posting above was about 12 hours ago.
My Ring Pro indicates 4039 mV now, all else looks the same.
I see from my router logs that the Ring Pro had reconnected 7 hours ago. So, the doorbell either reconnected or rebooted, and the voltage went up.
Always over 4000 mV
RSSI- 56 usually. Goes up to a best of 46 I have an Archer C9 router at about 30 feet away. Also does anyone know why my ssid is in ‘red’ letters (my WiFi name)? I always have solid internet. Why is it in red?
I had an extender at one point but when I did a Speedtest.net (at doorbell location with door closed) it was really low mb/s. But I had good RSSI around 32.
So I went back to just my router at RSSI- 53 but now I get back to decent mb/s upload and download speeds. There is always a little delay no matter what. So I wouldn’t worry too much on the RSSI. Unless it’s over 60/65. Just a reference #.
I have a nice router even though it’s 9 years old. I get 1200mb/s DL speeds.
So when I get the RSSI @ 53. I still get great results. So I do t know what kind of router you have but you might need an upgrade. Also. Live View might be affected by their (Ring) servers as well. Just as long as your recording properly and can go back and view past events. You’re fine.
RSSI -22 (up from -45), @ 17V.
Stuck an old router in Repeater mode right next to the Ring Doorbell Pro, lol.
Using my 2.4GHz Guest Wifi network.
(Using 5GHz from primary router worked, but wasn’t as good)
Ring mobile app is very responsive in displaying videos.