I've had my spotlight camera for a little over a year and use the battery powered version.
I went to change the battery yesterday, but the device will not recognize a fresh battery in either slot and will not power on. I've tried using three separate batteries, which were all at full power.
I've tried using the app as well as resetting using the button on top, but when the device wont even power up these steps will obviously not work.
Any suggestions or am I just out of luck with this device?
Solved! Go to Solution.
Having this exact problem today. My Ring spotloght cam is less than two years old, and has worked without issue UNTIL today. Fresh battery in both slots and it will not respond at all. Looking for a response soon. Thanks @aingalls12
I tried using the Ring community support chat feature and was told someone would be with me shortly.....After waiting 45 mintutes I had to move along. This is probably not a high priority for them since the warranty is expired and they already have my money.
I'll try calling the 800 number tomorrow and post any relevant updates.
Sorry to hear about this experience, neighbors. Your battery powered Spotlight Cams should definitely recognize an inserted battery and reconnect. The best first step is to ensure there is no debris in the battery hatch of the Cam, and that the hatch is closed securely.
If the Camera is still not responding to a fully charged battery, please attempt a reset on the Cam by holding the setup button for 20 seconds. If this concern persists, the next best step will be to reach out to our support team for more in-depth troubleshooting. Feel free to update us on the results!
Thank you for reviewing and responding. I have called the toll free number and will, hopefully, be speaking to someone from Ring later today.
Just for clarity, I have attempted to use the reset button with no success. Both with the battery door closed and open.
Also of note, when I put a battery in either of the open slots, a red light illuminates next to the battery. When I press and hold the reset button, the light turns off. When I release the button, the red light returns. At no point does the external status light on the bottom of the device begin flashing.
This whole thing makes me wonder if there is some sort of firmware problem that is not allowing the device to recognize the presence of a battery.
aingalls12, you are not alone in your thinking. I have done the exact same troubleshooting steps you have done (except for making calls, which will be coming). Same light status in the open slots, reset not working. I too am also wondering if a firmware update is to blame.
I realize this does not offer any solutions, just wanted to add that this is happening to multiple customers.
Mine is doing the same thing. Not reconizing newly purchased batteries. Is there a problem with the Spotlight camera? Mine is less than 2 years old