1) I would like the ability to have an audible alarm sound during certain times. For instances, I have one watching where I park. From midnight to 5 AM I would like the alarm to sound anytime it detects someone. We have a lot of vehicle break ins around my area and my old system did this.
2) Include a thumbnail clip of the motion on the alert when receiving notifications
3) Ability to see what triggered the motion by putting a box around the motion or some other method. This would also help in adjusting the system sensativity and motion zones.
Sound siren on all (or selected) cams when siren on alarm is activated
And +1 on the above 3 points
I would like to be able to turn on my floodlight cam with Alexa. My dogs need to go out after dark and I would like to turn on the light before I open the door. I know I can do that with the app, but it would be much easier to just tell Alexa to turn on the light especially in the middle of the night. I know Alexa can turn on some Ring lights, but I have not found a way to do it with the floodlight cam specifically.
Be able to turn off the motion sensors as per a schedule.
We are using our spotlight cam in our front office area and would like to be able to disable it during certain days and times.
@thptrek wrote:Be able to turn off the motion sensors as per a schedule.
We are using our spotlight cam in our front office area and would like to be able to disable it during certain days and times.
This feature is already availible, just go to motion settings in the camera youd like a schedule, and one of the options should be motion schedule. Good luck!
The motion schedule just seems to disable the alerts. The camera is still picking up motion and logging history events. This causes the camera to still be active and runs the battery down real quick.
@thptrek wrote:The motion schedule just seems to disable the alerts. The camera is still picking up motion and logging history events. This causes the camera to still be active and runs the battery down real quick.
Ah, forgive me, i misundersood. This is a very good point.
All of this. Plus, on Solar Cameras, make the 30 second video keep recording if motion continues to be detected. The 30 seconds is a joke. I'd rather have a dead battery than miss someone breaking into my house.
Hi mackhax0r, have you set the Motion Frequecy to “frequent”? This will help reduce the cooldown/gap between motion triggered videos to the minimum.