cancel
Showing results for 
Search instead for 
Did you mean: 

Ring Floodlight Camera (wired) - No Power

Highlighted
New Neighbor

Ring Floodlight Camera (wired) - No Power

So I installed the camera the other day, it worked for a few hours and now has no power - I have taken it down and fed power to it from a standard plug, but there is no power to it, When I power it on I am getting a little flash on the lights, but camera will not power on, or led flash when I press the reset button, or hold it for 15 secs.  Video of what happening attached.  Any advice on what to do?  I bought it a long while ago and have only just installed it.

Thanks

3 REPLIES 3
Highlighted
New Neighbor

Re: Ring Floodlight Camera (wired) - No Power

Help!
Highlighted
Community Manager

Re: Ring Floodlight Camera (wired) - No Power

Hey @IanEagle! Your Floodlight Cam should certainly be powering up as long as it was installed to a junction box supplying the proper power,  per the installation guide. As the Floodlight Cam utilizes high voltage, we are unable to advise any wiring or power related troubleshooting. That being said, the standard and best first step would be to ensure no light switch or dimmer switch is interfering with power, and the breaker is not tripped, or off.

 

For power related concerns, we recommend checking with an electrician.

 

If this concern persists, feel free to reach out to our support team for a more in-depth look at the Cam. I hope this helps! Smiley Happy 



Like my answer? Accept it as a solution (click on the 'Accepted Solution' button next to reply). Learn more about the Community, here.
Highlighted
New Neighbor

Re: Ring Floodlight Camera (wired) - No Power

That's pretty unhelpful. I have of course checked the power supply, all is fine there. I have also wired it direct to a plug, exactly the same issue. The problem is with the device, not the power to it. Please advise.