Hey @Jwilder728. Could you try disconnecting the power to the Floodlight Cam from the breaker for a few minutes, and then reconnecting the power? After this is done, press and hold the setup button for 20 seconds. Once this reboot is completed, go into the Ring app > Main Menu > Devices > Floodlight Cam > Device Health > Change or Reconnect to Wifi. From here this will take you through another setup of the device, and once this is completed, monitor the device to see if the lights keep coming on.
If the lights continue to come on, please check out our Help Center Article here which showcases the range of view for the lights to trigger on, as there may be something in the larger zone that is setting off the lights form the PIR sensor. In the event this still does not address your concern, please give our support team a call at one of the numbers available here. We’re taking additional steps to protect our team and help reduce the spread of COVID-19. This has resulted in longer than normal wait times. If you are outside of the US, please read our response to COVID-19 here to see how to contact support. Let me know how this goes!